Skip to main content

Alert

Due to a lapse in appropriations, the NRC has ceased normal operations. However, excepted and exempted activities necessary to maintain critical health and safety functions—as well as essential progress on designated critical activities, including those specified in Executive Order 14300—will continue, consistent with the OMB-Approved NRC Lapse Plan.

Navigation

Spotlight

StandardReview Plan for the Review of Safety Analysis Reports for Nuclear Power Plants:LWR Edition — Design of Structures, Components, Equipment, andSystems (NUREG-0800, Chapter 3)

This NUREG publication has been issued for public comment. Comments will be accepted until May 1, 2013. To submit comments, please see Docket ID Number NRC-2013-0041.

This page includes links to files in non-HTML format. See Plugins, Viewers, and Other Tools for more information.

Section Title Rev. Date Updated
3.2.1 Seismic Classification Rev. 3 08/2016
Draft Rev. 3 08/2015
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.2.2 System Quality Group Classification Rev. 3 08/2016
Draft Rev. 3 08/2015
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.3.1 Wind Loadings Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 08/1978
Rev. 0 11/1975
3.3.2 Tornado Loadings Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 08/1978
Rev. 0 11/1975
3.4.1 Internal Flood Protection for Onsite Equipment Failures Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 03/1978
Rev. 0 11/1975
3.4.2 Analysis Procedures Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 NONE
Rev. 0 11/1975
3.5.1.1 Internally Generated Missiles (Outside Containment) Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 04/1978
Rev. 0 11/1975
3.5.1.2 Internally-Generated Missiles (Inside Containment) Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 08/1978
Rev. 0 11/1975
3.5.1.3 Turbine Missiles Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 07/1978
Rev. 0 11/1975
3.5.1.4 Missiles Generated by Tornadoes and Extreme Winds Rev. 4 03/2015
Draft Rev. 4 07/2013
Rev. 3 03/2007
Draft Rev. 3 01/2006
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 07/1978
Rev. 0 11/1975
3.5.1.5 Site Proximity Missiles (Except Aircraft) Rev. 4 03/2007
Rev. 3 06/1996
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.5.1.6 Aircraft Hazards Rev. 4 03/2010
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 NONE
Rev. 0 11/1975
3.5.2 Structures, Systems, and Components to be Protected from Externally-Generated Missiles Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 03/1978
Rev. 0 11/1975
3.5.3 Barrier Design Procedures Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.6.1 Plant Design for Protection Against Postulated Piping Failures in Fluid Systems Outside Containment Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 10/1990
Rev. 1 07/1981
Rev. 0 11/1975
3.6.2 Determination of Rupture Locations and Dynamic Effects Associated with the Postulated Rupture of Piping Rev. 3 12/2016
Draft Rev. 3 08/2015
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.6.3 Leak-Before-Break Evaluation Procedures Rev. 1 03/2007
Rev. 0 03/1987
3.7.1 Seismic Design Parameters Rev. 4 12/2014
Draft Rev. 4 03/2013
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 08/1989
Rev. 1 07/1981
Rev. 0 11/1975
3.7.2 Seismic System Analysis Rev. 4 09/2013
Draft Rev. 4 03/2013
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 08/1989
Rev. 1 07/1981
Rev. 0 11/1975
3.7.3 Seismic Subsystem Analysis Rev. 4 09/2013
Draft Rev. 4 03/2013
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 08/1989
Rev. 1 07/1981
Rev. 0 11/1975
3.7.4 Seismic Instrumentation Rev. 3 07/2014
Draft Rev. 3 08/2013
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.8.1 Concrete Containment Rev. 4 09/2013
Draft Rev. 4 03/2013
Rev. 3 05/2010
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.8.2 Steel Containment Rev. 3 05/2010
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.8.3 Concrete and Steel Internal Structures of Steel or Concrete Containments Rev. 4 09/2013
Draft Rev. 4 03/2013
Rev. 3 05/2010
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.8.4 Other Seismic Category I Structures Rev. 4 09/2013
Draft Rev. 4 03/2013
Rev. 3 05/2010
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.8.5 Foundations Rev. 4 09/2013
Draft Rev. 4 03/2013
Rev. 3 05/2010
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.9.1 Special Topics for Mechanical Components Rev. 4 12/2016
Draft Rev. 4 08/2015
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 04/1978
Rev. 0 11/1975
3.9.2 Dynamic Testing and Analysis of Systems, Structures, and Components Rev. 4 03/2017
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 08/1978
Rev. 0 11/1975
3.9.3 ASME Code Class 1, 2, and 3 Components, and Component Supports, and Core Support Structures Rev. 3 04/2014
Draft Rev. 3 06/2013
Rev. 2 03/2007
Draft Rev. 2 06/1996
Rev. 1 07/1981
Rev. 0 11/1975
3.9.4 Control Rod Drive Systems Rev. 4 03/2017
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 04/1984
Rev. 1 07/1981
Rev. 0 11/1975
3.9.5 Reactor Pressure Vessel Internals Rev. 4 03/2017
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 04/1978
Rev. 0 11/1975
3.9.6 Functional Design, Qualification, and Inservice Testing Programs for Pumps, Valves, and Dynamic Restraints Rev. 4 03/2017
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 04/1978
Rev. 0 11/1975
3.9.7 Risk-Informed Inservice Testing Rev. 0 08/1998
3.9.8 Risk-Informed Inservice Inspection of Piping Rev. 0 09/2003
3.10 Seismic and Dynamic Qualification of Mechanical and Electrical Equipment Rev. 4 12/2016
Draft Rev. 4 08/2015
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 04/1978
Rev. 0 11/1975
3.11 Environmental Qualification of Mechanical and Electrical Equipment Draft Rev. 4 12/2017
Rev. 3 03/2007
Draft Rev. 3 06/1996
Rev. 2 07/1981
Rev. 1 07/1978
Rev. 0 11/1975
3.12 ASME Code Class 1, 2, and 3 Piping Systems, Piping Components and their Associated Supports Rev. 1 04/2014
Draft Rev. 1 06/2013
Initial Issuance 03/2007
3.13 Threaded Fasteners - ASME Code Class 1, 2, and 3 Initial Issuance 03/2007
Draft Rev. 0 06/1996
  Branch Technical Positions (BTPs)    
BTP 3-1 Classification of Main Steam Components Other than the Reactor Coolant Pressure Boundary for BWR Plants (Former Section 3.2.2, Appendix A, BTP has been separated into an individual section.) Rev. 2 03/2007
BTP 3-2 Classification of BWR/6 Main Steam and Feedwater Components Other than the Reactor Coolant Pressure Boundary (Former Section 3.2.2, Appendix B, BTP has been separated into an individual section.) Rev. 2 03/2007
BTP 3-3 Protection Against Postulated Piping Failures in Fluid Systems Outside Containment (Former Section 3.6.1 BTP has been separated into an individual section.) Rev. 3 03/2007
BTP 3-4 Postulated Rupture Locations in Fluid System Piping Inside and Outside Containment (Former Section 3.6.3 BTP has been separated into an individual section.) Rev. 3 12/2016
Draft Rev. 3 08/2015
Rev. 2 03/2007

Page Last Reviewed/Updated Wednesday, March 24, 2021

Page Last Reviewed/Updated Wednesday, March 24, 2021