Skip to main content

Alert

Due to a lapse in appropriations, the NRC has ceased normal operations. However, excepted and exempted activities necessary to maintain critical health and safety functions—as well as essential progress on designated critical activities, including those specified in Executive Order 14300—will continue, consistent with the OMB-Approved NRC Lapse Plan.

Information Notices - 2010

subscribe to page updates
subscribe to page updates

This page includes links to files in non-HTML format. See Plugins, Viewers, and Other Tools for more information.

Document Number Title Revision Publish Date Reviewed Date
IN-10-27 Ventilation System Preventive Maintenance and Design Issues -- 12/16/2010 --
IN-10-26 Submerged Electrical Cables -- 12/02/2010 --
IN-10-25 Inadequate Electrical Connections -- 11/17/2010 --
IN-10-24 Notice of Possible Source Leakage During Non-Routine Maintenance on a Gammacell 40 Irradiator -- 11/19/2010 --
IN-10-23 Malfunctions of Emergency Diesel Generator Speed Switch Circuits -- 11/01/2010 --
IN-10-22 Fuel Assemblies Damaged During Refueling Operations Due To Misalignment -- 10/25/2010 --
IN-10-21 Crack-Like Indication in the U-Bend Region of a Thermally Treated Alloy 600 Steam Generator Tube -- 10/06/2010 --
IN-10-20 Turbine-Driven Auxiliary Feedwater Pump Repetitive Failures -- 09/24/2010 --
IN-10-19 Updated Probabilistic Seismic Hazard Estimates in Central and Eastern United States -- 09/16/2010 --
IN-10-18 Implications of Updated Probabilistic Seismic Hazard Estimates in Central and Eastern United States on Existing Plants -- 09/02/2010 --
IN-10-17 Common Cause Failure of Boiling-Water Reactor Recirculation Pumps with Variable Speed Drives -- 09/10/2010 --
IN-10-16 Failure To Disable Unsafe Geometry Bandsaw Reservoir Results in Criticality Safety-Related Alert -- 08/13/2010 --
IN-10-15 Fuel Cycle Facility Configuration Management Errors -- 08/13/2010 --
IN-10-14 Containment Concrete Surface Condition Examination Frequency and Acceptance Criteria -- 08/04/2010 --
IN-10-13 Failure to Ensure that the Post-Fire Shutdown Procedures Can Be Performed -- 07/22/2010 --
IN-10-12 Containment Liner Corrosion -- 06/18/2010 --
IN-10-11 Potential for Steam Voiding Causing Residual Heat Removal System Inoperability -- 06/16/2010 --
IN-10-10 Implementation of a Digital Control System Under 10 CFR 50.59 -- 05/28/2010 --
IN-10-09 Importance of Understanding Circuit Breaker Control Panel Indications -- 04/14/2010 --
IN-10-08 Welding and Nondestructive Examination Issues -- 04/09/2010 --
IN-10-07 Welding Defects in Replacement Steam Generators -- 04/05/2010 --
IN-10-06 Inadvertent Control Rod Withdrawal Event While Shutdown -- 02/17/2010 --
IN-10-05 Management Of Steam Generator Loose Parts and Automated Eddy Current Data Analysis -- 02/03/2010 --
IN-10-04 Diesel Generator Voltage Regulation System Component Due to Latent Manufacturing Defect -- 02/26/2010 --
IN-10-03 Failures Of Motor-Operated Valves Due To Degraded Stem Lubricant -- 02/03/2010 --
IN-10-02 Construction-Related Experience with Cables, Connectors, and Junction Boxes -- 01/28/2010 --
IN-10-01 Pipe Support Anchors Installed Improperly -- 03/01/2010 --

To top of page

Page Last Reviewed/Updated Wednesday, February 03, 2021

Page Last Reviewed/Updated Wednesday, February 03, 2021