United States Nuclear Regulatory Commission - Protecting People and the Environment

Public Meeting Schedule: Meeting Details

[ New Search ]
Meeting info
The purpose of this teleconference is to discuss Dominion Energy Nuclear Connecticut, Inc.'s (DENC, the licensee) planned relief request for Millstone Power Station, Unit No. 3 (Millstone 3), related to Millstone 3 fillet welds. The licensee requests relief from certain American Society of Mechanical Engineers Section XI requirements for two fillet welds fabricated during the "B" reactor plant component cooling water heat exchanger replacement project. The request would permit the two welds, which were made without a 200 degrees Fahrenheit preheat as required by the Code of Construction, to remain in service. The licensee will discuss the scope and proposed schedule associated with the Millstone 3 submittal.
Meeting Feedback
Meeting Dates and Times
1:00PM - 2:00PM

Meeting Location
Richard Guzman

Participation Level
Category 1
NRC Participants
Robert Davis, Office of Nuclear Reactor Regulation
Richard Guzman, Office of Nuclear Reactor Regulation
External Participants
Craig Sly, Dominion Energy
David Dodson, Dominion Energy
Jeff Langan, Dominion Energy
Joseph Rigatti, Dominion Energy
Lori Kelly, Dominion Energy
Marc Hall, Dominion Energy
MaryLou Calderone, Dominion Energy
Michael Lalikos, Dominion Energy
Shayan Sinha, Dominion Energy
Docket Numbers - Facility Names
05000423 - Millstone 3
Related Documents
ML19022A243 - Millstone Power Station, Unit 3 - Presentation Material for 1/22/19 Pre-Submittal Meeting re: Fillet Weld PreHeat Alternative Request

ML19007A283 - 01/22/2019 Presubmittal Teleconference with Dominion Energy Nuclear Connecticut, Inc. Regarding Request for Alternative to American Society of Mechanical Engineers Requirements Related to Fillet Welds for Millstone Power Station, Unit No. 3

The length and schedule for this meeting is tentative. Interested members of the public can participate in this meeting via a toll-free audio teleconference. Please contact the above-listed meeting contacts to obtain the telephone number and passcode before the teleconference.