The U.S. Nuclear Regulatory Commission is in the process of rescinding or revising guidance and policies posted on this webpage in accordance with Executive Order 14151 Ending Radical and Wasteful Government DEI Programs and Preferencing, and Executive Order 14168 Defending Women From Gender Ideology Extremism and Restoring Biological Truth to the Federal Government. In the interim, any previously issued diversity, equity, inclusion, or gender-related guidance on this webpage should be considered rescinded that is inconsistent with these Executive Orders.

An Assessment of TRACE V4.160 Code Against PACTEL ATWS-10 – 13 and ATWS-20 – 21 Pressurizer Experiments (NUREG/IA-0231)

On this page:

Download complete document

Publication Information

Date Published: June 2010

Prepared by:
E. Takasuo

VTT Processes
P.O.B. 1604
02044 VTT
Finland

A. Calvo, NRC Project Manager

Prepared for:
Office of Nuclear Regulatory Research
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001

Availability Notice

Abstract

In this report an assessment of TRACE V4.160 against six pressurizer separate effect tests, namely PACTEL ATWS-10 - 13 and ATWS-20 – 21, is presented. The tests were conducted at the PACTEL test facility as a part of the ATWS test series in 1998 and they consist of four insurge-outsurge transients and two spray transients. A pressurizer model which consists of a 30-node pressurizer component, a surge line, a spray line and a powered heat structure to simulate the pressurizer wall and heaters was used in the simulations. A brief description of the test facility is also given.

The insurge-outsurge test simulation results show a slightly exaggerated peak pressure which may be due to underestimated wall condensation in the insurge. In the simulations in which the effectiveness of spray was studied a relatively good agreement between the simulation results and the experimental results was found.

Page Last Reviewed/Updated Tuesday, March 09, 2021