Installation of RELAP5/MOD3.2 on 80486 and Pentium Based Personal Computers (NUREG/IA-0142)

On this page:

Download complete document

Publication Information

Date Published: October 1998

Prepared by:
Chang S. Cho, KNFC., LTD
Young Seok Bang, Eun Kyung Kim, Hho Jung Kim, KINS

Korea Nuclear Fuel Co., LTD.
DogJin-Dong 150
Yusong Gu, Daejeon City

Korea Institute of Nuclear Safety
19 Gusung-Dong
Yusung Gu, Taejon

Prepared as part of:
The Agreement on Research Participation and Technical Exchange
under the International Code Application and Maintenance Program (CAMP)

Office of Nuclear Regulatory Research
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001

Availability Notice


RELAP5/MOD3.2 has been installed on Intel Chip based personal computers at KNFC. This report is to present the installation procedures and test results for CPU time comparison and installation verification. Installation of RELAP5/MOD3.2 on PC has been done using Lahey Fortran F77L3 compiler under Windows 95 environment. The "dinstls" script with proper modifications was used to extract the source for conversion and then several modifications were done for installation on PC. Compilation and linking has been done using a MAKE utility and generation of TPFH20 has been done also. Four test cases were used to verify the conversion and installation of RELAP5/MOD3.2 on PC. CPU time benchmark calculation was also done. The results show that the use of PC version could be an option for the users based on the availability of hardware and the speed of CPU.

Page Last Reviewed/Updated Tuesday, March 09, 2021