Inspection
Report Date |
Description |
| 12/07/12 |
Mangiarotti S.p.A, Monfalcone, Italy, limited scope inspection to assess Mangiarotti's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs specifically associated with the design, fabrication, assembly, and testing of the accumulators, core make-up tanks, passive residual heat removal heat exchangers, and the pressurizers for the Westinghouse Electric Company AP1000 reactor design.
|
| 11/30/12 |
Mitsubishi Heavy Industries, Ltd. (MHI), Kobe, Japan, limited scope inspection to assess MHI's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs specifically, the quality assurance program will be reviewed to determine if the preparation and testing of the Full-Scale Mock-up and testing of re-designed anti-vibration bars are adequate and correct and meet the applicable requirements of Appendix B to 10 CFR Part 50, 10 CFR Part 21, and American Society of Mechanical Engineers Code Section III, "Rules for Construction of Nuclear Facility Components."
|
| 11/09/12 |
Westinghouse Electric Company (WEC), Cranberry Township, PA., limited scope inspection to assess WEC's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs specifically related to corrective actions to issues identified during two previous NRC inspections: (1) the Engineering Design Verification Inspection (Inspection Report No. 99900404/2011-201) performed in June and July, 2011; and (2) the Environmental Qualification Inspection (Inspection Report No. 99900404/2012-201) performed in March of 2012.
|
| 11/02/12 |
Enertech, Utah State University, Brea, CA, routine limited-scope inspection to assess Enertech's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs.
|
| 10/25/12 |
Flowserve Corporation, Limitorque Valve Actuator Manufacturing facility in Lynchburg, VA, routine limited-scope inspection to assess Flowserve Corporation's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs.
|
| 10/24/12 |
Shaw Modular Solutions (SMS), Charles, LA, limited-scope inspection to assess SMS's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs. Specifically, this inspection evaluated SMS's implementation of quality activities associated with the fabrication of structural modules for V.C. Summer Units 2 and 3 and Vogtle Units 3 and 4.
|
| 10/23/12 |
Curtiss-Wright Flow Control Company, Target Rock Division, Farmingdale, NY, routine limited-scope inspection to assess Curtiss-Wright's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs.
|
| 10/17/12 |
Flowserve Corporation, Raleigh, NC, routine limited-scope inspection to assess Flowserve Corporation's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs.
|
| 10/04/12 |
Nuclear Logistics, Inc. (NLI), Fort Worth, TX, routine limited-scope inspection to assess NLI's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs.
|
| 09/07/12 |
Wyle Laboratories, Huntsville, Alabama, limited-scope routine inspection to assess Wyle Laboratories' compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs specifically associated with testing services to support environmental qualification of components being supplied as part of the Westinghouse AP1000 reactor design.
|
| 07/27/12 |
National Technical Systems (NTS) facility in Acton, MA, limited-scope routine inspection to assess NTS's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs specifically associated with the seismic qualification testing of the tension bolt and position switch of the AP1000 design squib valves.
|
| 07/03/12 |
Nuclear Logistics, Inc. (NLI) facility in Fort Worth, TX, and at the Nemko Dallas USA, Inc. facility in Lewisville, TX, limited-scope inspection to assess NLI's compliance with selected portions of their quality assurance (QA) program and conformance to Regulatory Guide 1.180, "Guidelines for Evaluating Electromagnetic and Radio-Frequency Interference in Safety-Related Instrumentation and Control Systems," Revision 1, issued October 2003, as committed to in the AP1000 Design Control Document, Tier 2, Revision 19.
|
| 07/02/12 |
Kinectrics facility in Toronto, Ontario, limited-scope routine inspection to review implementation of Kinectric's quality assurance (QA) program and 10 CFR Part 21 program, specifically as it pertains to Kinectrics supply of testing services to support environmental qualification of components being supplied as part of the Westinghouse AP1000 reactor design as well as reviewing selected activities in support of testing and dedication of safety related components to the U.S. nuclear operating fleet.
|
| 06/22/12 |
Fauske & Associates, LLC (FAI), Burr Ridge, IL., limited-scope routine inspection was to assess FAI's compliance with quality assurance (QA) program and 10 CFR Part 21 program, specifically associated with QA activities associated with the environmental qualification type testing of instrument cable in support of AP1000 licensing activities, specifically the postulated loss-of-coolant accident design-basis event. These tests, including qualification and functional tests are associated with or directly impact closure of inspections, tests, analyses, and acceptance criteria (ITAAC) from Revision 19 of the certified AP1000 design. Currently, these ITAAC are incorporated into the combined licenses of Vogtle Units 3 and 4 and V.C. Summer Units 2 and 3.
|
| 06/06/12 |
SPX, Copes-Vulcan facility (SPX), McKean, PA., technically-focused, limited scope inspection of SPX's quality assurance (QA) program and 10 CFR Part 21 program, specifically associated with the QA activities associated with the design and manufacturing of the squib valves for the AP1000 reactor design.
|
| 05/18/12 |
Westinghouse Electric Company (WEC), New Stanton, PA., technically-focused, limited scope inspection was to assess WEC's compliance with selected portions of their quality assurance (QA) program.
|
| 05/17/12 |
Westinghouse Electric Company (WEC), Cranberry Township, PA., technically-focused, limited scope inspection was to assess WEC's compliance with selected portions of their quality assurance (QA) program and 10 CFR Part 21 program.
|
| 05/10/12 |
Clark Dynamics, LLC facility (hereafter referred to as Clark), Jefferson Hills, PA, technically-focused, limited scope inspection of Clark's quality assurance (QA) program and 10 CFR Part 21 program, specifically associated with the vibrational aging and seismic qualification of worm gear actuators and electrical penetrations associated with inspections, tests, analyses, and acceptance criteria (ITAAC) 2.2.01.05.ii, 2.2.02.05a.ii, 2.2.05.05a.ii, 2.3.02.05.ii, 2.3.07.05.ii, and 2.7.01.05.ii from Revision 19 of the Westinghouse AP1000 pressurized-water reactor certified design.
|
| 03/28/12 |
Rosemount Nuclear Instruments, Inc. (RNII), Chanhassen, MN, inspection of selected portions of RNII's quality assurance (QA) program and 10 CFR Part 21 program, specifically associated with RNII's implementation of quality activities associated with the design, procurement, manufacture, and testing of pressure transmitters with an emphasis on the 1154H and 3051N pressure transmitter product lines.
|
| 01/25/12 |
Mitsubishi Electric Corporation (MELCO), Kobe, Japan, inspection of selected portions of MELCO'S quality assurance (QA) program and 10 CFR Part 21 program
|
| 01/06/12 |
Shaw Modular Solutions, Lake Charles, LA, follow-up inspection of selected portions of SMS's quality assurance (QA) program and 10 CFR Part 21 program
|