Background and Derivation of ANS-5.4 Standard Fission Product Release Model (NUREG/CR-7003)

On this page:

Download complete document

Publication Information

Manuscript Completed: March 2009
Date Published: January 2010

Prepared by:
J.A. Turnbulla, C.E. Beyerb

aConsultant, United Kingdom

bPacific Northwest National Laboratory
902 Battelle Boulevard
Richland, WA 99352

NRC Job Code N6326

Office of Nuclear Regulatory Research
U.S. Nuclear Regulatory Commission
Washington DC 20555-0001

Availability Notice


This background report describes the technical basis for the newly proposed American Nuclear Society (ANS) 5.4 standard, Methods for Calculating the Fractional Release of Volatile Fission Products from Oxide Fuels.The proposed ANS 5.4 standard provides a methodology for determining the radioactive fission product releases from the fuel for use in assessing radiological consequences of postulated accidents that do not involve abrupt power transients. When coupled with isotopic yields, this method establishes the "gap activity," which is the inventory of volatile fission products that are released from the fuel rod if the cladding is breached.

Best-estimate and conservative upper-bound 95/95 tolerance models for predicting the release of volatile radioactive isotopes of krypton, xenon, and iodine are described. The isotope that provides the most significant contribution to equivalent dose to individuals is generally I-131 for accidents that occur during in-reactor operation or shortly after reactor operation (e.g., the fuel- handling accident) due to its dose to the thyroid. The existing conservative upper-bound model or predicting the I-131 release has been shown to be very conservative in comparison to the available measured release data for I-131. The 2009 model proposed herein predicts up to a factor of 2 lower release than the old ANS 5.4 release model.

Page Last Reviewed/Updated Wednesday, March 24, 2021