Fire Protection Research Program Corner Effects Tests (NUREG/CR-0833, SAND79-0966)

On this page:

Download complete document

Publication Information

Date Published: December 1979

Prepared by:
Leo J. Klamerus
Sandia Laboratories
Albuquerque, NM 87185
Operated by Sandia Corporation for the for the U.S. Department of Energy

Prepared for:
Division of Reactor Safety Research
Office of Nuclear Regulatory Research
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001

Under Memorandum of Understanding DOE 40-550-75

NRC FIN A-1010

Availability Notice


Under the direction of the Nuclear Regulatory Commission, Sandia Laboratories has been conducting confirmatory research in fire protection for nuclear power plants. During all previous full scale fire tests at Sandia Laboratories involving fires, both electrically and exposure initiated, an open area in a nuclear power plant was simulated. The question was often asked, "How much contribution to fire severity does a reradiating ceiling and wall make?" This report presents the results of several tests which address this question. By quantifying the effects of corner reradiation (i.e., a ceiling joining a wall) at different distances from a horizontal array of cable trays ignited by an exposure fire, it was found for the cables tested that fire damage, as measured by the extent of cable insulation degradation, varied approximately as the inverse of the square of the distance separating the cables from the corner. As experienced in previous Sandia fire tests, the difference in fire resistance between IEEE-383 qualified cable and unqualified cable was apparent in these corner-configuration tests.

Page Last Reviewed/Updated Wednesday, March 24, 2021