Skip to main content
A new keyword search will reset all filters below. You can further limit keyword search results with tags.

Section

Resolution Product Category

Facilities Type

Related Technical Area

Image

NUREG 0933

Displaying 1 - 9 of 9

Task II.D: REACTOR COOLANT SYSTEM RELIEF AND SAFETY VALVES: Testing Requirements

The objective of this task was to demonstrate by testing and analysis that the relief and safety valves, block valves, and associated piping in the reactor coolant system (RCS) were qualified for the full range of operating and accident conditions; …

Task II.E.6: SYSTEM DESIGN: In Situ Testing of Valves: Test Adequacy Study

The objective of this task was to evaluate whether existing requirements for valve testing provided adequate assurance of performance under design conditions. ITEM II.E.6.1: TEST ADEQUACY STUDY DESCRIPTION Historical Background The purpose of this TMI …

Task II.F: INSTRUMENTATION AND CONTROLS: Additional Accident Monitoring Instrumentation

The objective of this task was to provide instrumentation to monitor plant variables and systems during and following an accident. Indications of plant variables and status of systems important to safety are required by the plant operator (licensee) …

Task II.G: ELECTRICAL POWER: Power Supplies for Pressurizer Relief Valves, Block Valves, and Level Indicators

The objective of this task was to increase the reliability and diversification of the electrical power supplies for certain safety-related equipment. ITEM II.G.1: POWER SUPPLIES FOR PRESSURIZER RELIEF VALVES, BLOCK VALVES, AND LEVEL INDICATORS DESCRIPTION …

Task III.A: EMERGENCY PREPAREDNESS AND RADIATION EFFECTS: Improve Licensee Emergency Preparedness - Short-Term: Upgrade Emergency Preparedness: Implement Action Plan Requirements for Promptly Improving Licensee Emergency Preparedness

TASK III.A.1: IMPROVE LICENSEE EMERGENCY PREPAREDNESS - SHORT-TERM The objectives of this task were to improve and upgrade licensee emergency preparedness by requiring improvements in facilities, plans, procedures, offsite support, technical assistance, …

Task III.A.2: EMERGENCY PREPAREDNESS AND RADIATION EFFECTS: Improving Licensee Emergency Preparedness - Long-Term: Amend 10 CFR 50 and 10 CFR

The objective of this task was to upgrade the emergency preparedness of nuclear power plants. Specific criteria to meet this objective were delineated in NUREG-0654. [1] ITEM III.A.2.1: AMEND 10 CFR 50 AND 10 CFR 50, APPENDIX E The four parts of this item …

Task III.A.3: EMERGENCY PREPAREDNESS AND RADIATION EFFECTS: Improving NRC Emergency Preparedness: NRC Role in Responding to Nuclear Emergencie

The objective of this task is to enable NRC, in the event of a nuclear accident at a licensed reactor facility, to: (1) monitor and evaluate the situation and potential hazards, (2) advise the licensee's operating staff as needed, and (3) in an extreme …

Task III.B: EMERGENCY PREPAREDNESS OF STATE AND LOCAL GOVERNMENTS: Transfer of Responsibilities to FEMA

The objective of this task is to upgrade the state of emergency preparedness of State and local governments affected by nuclear facilities. The Federal Emergency Management Agency was given the lead on this effort by the President on December 7, 1979. …

Task III.C: PUBLIC INFORMATION: Have Information Available for the News Media and the Public: Review Publicly Available Documents

The objectives of this task are: (1) to have information available for the news media and the public describing how nuclear plants operate, radiation and its health effects, and protective actions against radiation; and (2) to provide training for members …

Page Last Reviewed/Updated 3/1/2026

Disclaimer: Some of the formatting in NUREG-0933 may not be correct. We are currently working on fixing the formatting.