Part 21 Report - 1997-558

ACCESSION #: 9712040205 The Boeing Company P.O. Box 3707 Seattle, WA 98124-2207 November 26, 1997 G-1151-SJA-97-564 Document Control Desk United States Nuclear Regulatory Commission Washington, D.C. 20555 Reference: a) Boeing Letter G-1151-RSO-92-365 dated August 31, 1992; R. S. Orr to the NRC Operations Center BOEING b) NRC Letter Docket No. 99901227 dated August 12, 1992; L. J. Norrholm to R. S. Orr; Subject: Response to 10 CFR 21 Inquiry Dear Sir or Madam: In accordance with the reference correspondence and 10 CFR 21, Boeing is sending the NRC the attached error notice(s) received from our former software suppliers. Because of unknown current addresses, the following former customers were not notified: Reactor Controls, Inc. Echo Energy Consultants, Inc. Nuclear Applications and Systems Analysis Company (Japan) Nuclear Power Services Error notices have been sent to our other former customers. Very truly yours, Sandra J. Andrews Nuclear Administrator Phone: (206) 865-6248 FAX: (206) 865-4851 Mail Stop: 7A-33, or e-mail: Sandra.Andrews@PSS.Boeing.com Enclosure(s): GTSTRUDL Program Report Form 97.18 Georgia Institute of Technology GT STRUDL [Registered copy] November 17, 1997 Attention: Nuclear Administrator Boeing Information & Support Services P.O.Box 24346, M/S 7A-33 Seattle, Washington 98124-0346 RE: GT STRUDL Dear Sir or Madam: Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM 97.17 and a GTSTRUDL QA CUSTOMER ACKNOWLEDGEMENT FORM. Please sign and return the GTSTRUDL QA CUSTOMER ACKNOWLEDGEMENT FORM to acknowledge receipt of the GTSTRUDL Program Report. Thank you for reviewing the Program Report and for returning the Acknowledgement Form. Best regards, CASE Center David C. Key Configuration Control Manager Enclosures Computer Aided Structural Engineering Center Phone: (404) 894-2670 School of Civil & Environmental Engineering Fax: (404) 894-8014 Atlanta, Georgia 30332-0355 USA casec@ce.gatech.edu A Unit of the University System of Georgia GTSTRUDL Program Report Form GPRF No.: FROM: Computer-Aided Structural Engineering Center DATE: Georgia Institute of Technology Atlanta, Georgia 30332-0355 SEVERITY LEVEL: _ URGENT Problem results in incorrect answers which may not be apparent or job aborts and cannot be recovered within the session or job. _ SERIOUS Problem results in incorrect answers which are obvious or problem prevents completion of a particular user's task. _ MINOR Problem can be worked around or problem poses high frustration factor. _ INFORMATIVE Documentation error, program usage tip, user inconveniences. Date Problem Confirmed Date Notification Sent Computers Operating System Version Target Release for Correction Signature Title R & D Division Typed or Printed Name Date of Signature Signature Title Professional Services Division Typed or Printed Name Date of Signature Rev 2.2 GTSTRUDL Program Report Form (Continued) GPRF No.: DATE: DESCRIPTION: If rigid bodies (TYPE RIGID PIN, etc.) exist, the DBX commands WRITE MEMBER ATTRIBUTES, WRITE MEMBER CONSTANTS, WRITE MEMBER PROPERTIES, WRITE SECTION FORCES, and WRITE SECTION DISPLACEMENTS will abort if the rigid bodies are in the member list. Workarounds: 1. Use the explicit member list option (not "ALL MEMBERS") and exclude the rigid bodies. 2. Inactivate the rigid bodies and use the ALL ACTIVE MEMBERS option. Documentation: Section 2, "The WRITE Command", Volume 5, GTSTRUDL User Reference Guide. Section 2.1.3.4, "ACTIVE/INACTIVE Structure Specifications", Volume 1, GTSTRUDL Users Reference Guide. Rev 2.2 *** END OF DOCUMENT ***

Page Last Reviewed/Updated Friday, January 31, 2020