Part 21 Report - 1997-056
ACCESSION #: 9704250026
Information & Support Services
P.O. Box 3707
Seattle, WA 98124-2207
BOEING
April 18, 1997
G-1151-SJA-97-176
Document Control Desk
United States Nuclear Regulatory Commission
Washington, D.C. 20555
Reference: a) Boeing Letter G-1151-RSO-92-365 dated August 31,
1992; R. S. Orr to the NRC Operations Center
b) NRC Letter Docket No. 99901227 dated August 12, 1992;
L. J. Norrholm to R. S. Orr; Subject: Response to 10
CFR 21 Inquiry
Dear Sir or Madam:
In accordance with the reference correspondence and 10 CFR 21, Boeing is
sending the NRC the attached error notice(s) received from our former
software suppliers. Because of unknown current addresses, the following
former customers were not notified:
Reactor Controls, Inc.
Echo Energy Consultants, Inc.
Nuclear Applications and Systems Analysis Company (Japan)
Nuclear Power Services
Error notices have been sent to our other former customers.
Very truly yours,
Sandra J. Andrews
Nuclear Administrator
Phone: (206) 865-6248
FAX: (206) 865-4851
Mail Stop: 7A-33, or
e-mail: Sandra.Andrews@PSS.Boeing.com
Enclosure(s): GTSTRUDL Program Report Form No. 97.03
Georgia Institute
of Technology
Computer Aided Structural Engineering Center
School of Civil & Environmental Engineering
Atlanta, Georgia 30332-0355 USA
Phone: (404) 894-2260
Fax: (404) 894-8014
casec@ce.gatech.edu
November 26, 1996
Attention: Nuclear Administrator
Boeing Information & Support Services
P.O.Box 24346, M/S 7A-33
Seattle, Washington 98124-0346
RE: GT STRUDL
Dear Sir or Madam:
Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM No. 96.25 and
a VENDOR ACKNOWLEDGMENT FORM. Please sign and return the VENDOR AC-
KNOWLEDGMENT FORM to acknowledge receipt of the GTSTRUDL Program Report.
Thank you for reviewing the Program Report and for returning the
Acknowledgment Form.
Best regards,
CASE Center
Lawrence F. Kahn
Director
LFK/tlk
Enclosures
A Unit of the University System of Georgia An Equal Education and
Employment Opportunity Institution
GTSTRUDL Program Report Form
GPRF No.:
DATE:
FROM: Computer-Aided Structural Engineering Center
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
SEVERITY LEVEL:
X URGENT Problem results in incorrect answers which may not be
apparent or job aborts and cannot be recovered within
the session or job.
SERIOUS Problem results in incorrect answers which are
obvious or problem prevents completion of a
particular user's task.
MINOR Problem can be worked around or problem poses high
frustration factor.
INFORMATIVE Documentation error, program usage tip, user
inconveniences.
Date Problem Confirmed
Date Notification Sent
Computers All
Operating System All
Version 94.01 and later
Target Release for Correction 97.01 NT
Mgr. ASD
Signature Title
R & D Division
Michael H. Swanger
Typed or Printed Name Date of Signature
Signature
Professional Services Division Title
Typed or Printed Name Date of Signature
Rev. 2.2
GTSTRUDL Program Report Form
(Continued)
GPRF No.:
DATE:
DESCRIPTION:
Specifying elastic member end connection spring constant data in
CHANGES mode may cause a subsequent STIFFNESS ANALYSIS to abort or
produce incorrect results.
Work around:
Give the PRINT MEMBER RELEASES command following the MEMBER RELEASES
command in CHANGES mode and prior to the STIFFNESS ANALYSIS command:
CHANGES
MEMBER RELEASES
1 TO 10 START ELASTIC KMZ 1000.0
ADDITIONS
PRINT MEMBER RELEASES
.
.
.
STIFFNESS ANALYSIS
Applicable sections of the User's Manual
MEMBER RELEASES Command Section 2.1.8.2, Volume 1
Rev. 2.2
*** END OF DOCUMENT ***
Page Last Reviewed/Updated Wednesday, March 24, 2021