United States Nuclear Regulatory Commission - Protecting People and the Environment

ACCESSION #: 9703050308

                     Information & Support Services

                              P.O. Box 3707

                         Seattle, WA 98124-2207

February 25, 1997


Document Control Desk

United States Nuclear Regulatory Commission

Washington, D.C. 20555

Reference:     a)   Boeing Letter G-1151-RSO-92-365 dated August 31,

                    1992; R. S. Orr to the NRC Operations Center

               b)   NRC Letter Docket No.  99901227 dated August 12,

                    1992; L.J. Norrholm to R. S. Orr; Subject: Response

                    to 10 CFR 21 Inquiry

Dear Sir or Madam:

In accordance with the reference correspondence and 10 CFR 21, Boeing is

I sending the NRC the attached error notice(s) received from our former

software suppliers.  Because of unknown current addresses, the following

former customers were not notified:

     Reactor Controls, Inc.

     Echo Energy Consultants, Inc.

     Nuclear Applications and Systems Analysis Company (Japan)

     Nuclear Power Services

     Error notices have been sent to our other former customers.

Very truly yours,

Sandra J. Andrews

Nuclear Administrator

Phone (206) 865-6248

FAX: (206) 865-4851

Mail Stop: 7A-33, or

e-mail: Sandra.Andrews@PSS.Boeing.com

Enclosure(s): GTSTRUDL Program Report Form No. 97.02

Georgia Tech             Computer Aided Structural Engineering Center

                         Georgia Institute of Technology

                         School of Civil & Environmental Engineering

                         Atlanta, Georgia 30332-0355



                         404o894o8014 FAX

February 17, 1996

Attention: Nuclear Administrator

Boeing Information & Support Services

P.O.Box 24346, M/S 7A-33

Seattle, Washington 98124-0346


Dear Sir or Madam:

Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM No. 97.02 and

a VENDOR ACKNOWLEDGMENT FORM.  Please sign and return the VENDOR AC-

KNOWLEDGMENT FORM to acknowledge receipt of the GTSTRUDL Program Report.

Thank you for reviewing the Program Report and for returning the

Acknowledgment Form.

Best regards,

CASE Center

Lawrence F. Kahn




An Equal Education and Employment

Opportunity Institution                 A Unit of the University System

                                        of Georgia

                      GTSTRUDL Program Report Form

                                                  GPRF No.:


FROM:     Computer-Aided Structural Engineering Center

          Georgia Institute of Technology

          Atlanta, Georgia 30332-0355


X    URGENT         Problem results in incorrect answers which may not be

                    apparent or job aborts and cannot be recovered within

                    the session or job.

     SERIOUS        Problem results in incorrect answers which are

                    obvious or problem prevents completion of a

                    particular user's task.

     MINOR          Problem can be worked around or problem poses high

                    frustration factor.

     INFORMATIVE    Documentation error, program usage tip, user


Date Problem Confirmed

Date Notification Sent

Computers      ALL

Operating System    ALL

Version 9001 thru 9701

Target Release for Correction 9702

                                   Director, R&D

Signature                               Title

R & D Division

Kenneth Will

Typed or Printed Name              Date of Signature

Signature                               Title

Professional Services Division

Typed or Printed Name              Date of Signature


                      GTSTRUDL Program Report Form


                                                  GPRF No.:



The Compute Wt. and CG feature under Check Model in GTModeler and GTMenu

will always output the weight in pounds.  In GTModeler, mass units are

available to change the output units but many users expect the force

units to control the output of the weight.


In GTModeler, use the Mass Unit to change the active mass units for the

weight.  There is not a work around in GTMenu.  The user must convert the

weight manually.

Applicable Section of the Documentation:

GTMODELER - Volume 6 of the GTSTRUDL Users Manual

CHECK MODEL                   -         Chapter 14

EXECUTIVE FUNCTION (Units)    -         Chapter 3

GTSTRUDL 9601 Release Guide, Volume 2 (GTMenu)


Page Last Reviewed/Updated Monday, March 30, 2020