Part 21 Report - 1995-207
ACCESSION #: 9510160200 Cardinal INDUSTRIAL PRODUCTS Nuclear Division of B&G Manufacturing Company, Inc. 3873 West Oquendo o Las Vegas, Nevada 89118-3098 (702) 739-1966 o Fax (702) 739-1960 September 26, 1995 QAM-95-078 Document Control Desk U.S. Nuclear Regulatory Commission Washington, D.C. 20555 Reference: 10 CFR Part 21 Notification Event Number: 29257 QAM 95-065, and QAM 95-070 Subject: Interim Report Supplemental Results This letter provides you notification that B&G Manufacturing Co., Inc.'s Cardinal Industrial Products Division (CIP) has identified four additional defective lots of 5/8 inch diameter x 3 inch blank Hex Capscrews ASTM-A193 Grade B7 and one additional lot of 3/8 diameter x 6 inch blank Hex Capscrews ASTM-A193 Grade B7, from which orders were processed and sold to customers by Cardinal Industrial Products, L.P., the entity from which B&G earlier this year purchased certain assets, including the name. The following is a list of those fasteners: *5/8 x 3 lot# 11128, Heat# CK256, Head Marking B7, C, TU1 *5/8 x 3 Lot# 8975, Heat# 03092, Head Marking B7, C, MF1, Q5 *5/8 x 3 Lot# 12180, Heat# L63051, Head Marking B7, C, CX1 *5/8 x 3 Lot# 9040, Heat# CK256, Head Marking B7, C, TU2 *3/8 x 6 Lot# 5247, Heat# 03067, Head Marking B7, C, MC1,L6 Attachment 1 and 2, to this report, identifies all of those customers who, based on the records acquired by CIP from the prior owners, received these suspect fasteners that could possibly create a safety hazard. All of these customers received these fasteners from the prior owner. The customers will be notified of this defect by CIP as a service to its current customers and will be instructed to evaluate this condition in accordance with 10 CFR Part 21 paragraphs 21.21 (a) (1) (ii) and (b) (1). Page 2 of 2 CIP has completed its investigation and will provide a completed reported within the sixty days specified in our previous correspondence. Should you have any questions, please contact me at (702) 739-1966. Sincerely yours, David Z. Hathcock Quality Assurance Manager enclosures: Attachment #1, 8 pages Attachment #2, 3 pages cc: NRC file Attachment #1 (Pages 1-8) omitted. Attachment #2 (Pages 1-3) omitted. *** END OF DOCUMENT ***
Page Last Reviewed/Updated Wednesday, March 24, 2021
Page Last Reviewed/Updated Wednesday, March 24, 2021