Part 21 Report - 1995-097

ACCESSION #: 9503060315

                         Boeing Computer Services
                         P.O. Box 24346
                         Seattle, WA 98124-0346

February 24, 1995
G-1151-RSO-95-095

Document Control Desk
United States Nuclear Regulatory Commission 
Washington, D.C.  20555

BOEING

Reference:     a)   Boeing Letter G-1151-RSO-92-365 dated August 31,
                    1992; R. S. Orr to the NRC Operations Center

               b)   NRC Letter Docket No. 99901227 dated August 12, 1992;
                    L. J. Norrholm to R. S. Orr; Subject: Response to 10
                    CFR 21 Inquiry

Dear Sir or Madam:

In accordance with the reference correspondence and 10 CFR 21, Boeing is
sending the NRC the attached error notice(s) received from our former
software suppliers.  Because of unknown current addresses, the following
former customers were not notified:

          Reactor Controls, Inc.

          Echo Energy Consultants, Inc.

          Nuclear Applications and Systems Analysis Company (Japan)

          Nuclear Power Services

Error notices have been sent to our other former customers.

Very truly yours,


R. S. Orr
Nuclear Administrator
G-1151 M/S 7A-33
(206) 865-6248

Attachment(s): GTICES Program Report Form No. 95.03


Georgia Tech             Computer Aided Structural Engineering Center

                         Georgia Institute of Technology
                         School of Civil & Environmental Engineering
                         Atlanta, Georgia 30332-0355
                         USA
                         404-894-2260
February 16, 1995        404-894-8014 FAX


Attention:  Nuclear Administrator
Boeing Computer Services
P. O. Box 24346, M/S 7A-33
Seattle, Washington 98124-0346

RE:  GT STRUDL

Dear Sir or Madam:

Enclosed please find a copy of the GTICES PROGRAM REPORT FORM No. 95.03
and a VENDOR ACKNOWLEDGEMENT FORM.  Please sign and return the VENDOR
ACKNOWLEDGEMENT FORM to acknowledge receipt of the GTICES Program Report.

Thank you for reviewing the Program Report and for returning the
Acknowledgement Form.

Best regards,
CASE Center


Catherine Lee
Configuration Control Manager

CL/apw
Enclosures


                      GTSTRUDL Program Report Form

                                                  GPRF No.: 95-03

                                                  DATE: February 16, 1995

FROM:     Computer-Aided Structural Engineering Center 
          Georgia Institute of Technology 
          Atlanta, Georgia 30332-0355

SEVERITY LEVEL:

x    URGENT         Problem results in incorrect answers which may not be
                    apparent or job aborts and cannot be recovered within
                    the session or job.

     SERIOUS        Problem results in incorrect answers which are
                    obvious or problem prevents completion of a
                    particular user's task.

     MINOR          Problem can be worked around or problem poses high
                    frustration factor.

     INFORMATIVE    Documentation error, program usage tip, user
                    inconveniences.


Date Problem Confirmed   February 15, 1995

Date Notification Sent   February 17, 1995

Computers   All

Operating System   All

Version   All previous and including 94.01

Target Release for Correction   95.01


Signature                                    Title
R & D Division


Typed or Printed Name                        Date of Signature


Signature                                    Title
Professional Services Division


Typed or Printed Name                        Date of Signature

                                                                 Rev. 2.2


                      GTSTRUDL Program Report Form
                               (Continued)

                                                  GPRF No.: 95.03

                                                  DATE: February 6, 1995

DESCRIPTION:

     GTModeler aborts when adding a FZ restraint using plane mode in Edit
Joints following the creation of a PZ loading on an element in the XY
plane.
     As a work-around, add the support condition before loading the
element.

Relevant Documentation:
     Edit Joints - GTSTRUDL User Manual, Volume 6, Section 13.4.1
     Generate Loads - GTSTRUDL User Manual, Volume 6, Section 11.3.3

                                                                 Rev. 2.2


*** END OF DOCUMENT ***