Part 21 Report - 1995-192
ACCESSION #: 9509070043
Information & Support Services
P.O. Box 3707
Seattle, WA 98124-2207
August 28, 1995
G-1151-SJA-95-319
Document Control Desk
United States Nuclear Regulatory Commission
Washington, D.C. 20555
BOEING Reference: a) Boeing Letter G-1151-RSO-92-365 dated August 20,
1992; R. S. Orr to the NRC Operations Center
b) NRC Letter Docket No. 99901227 dated August 12,
1992; L. J. Norrholm to R. S. Orr; Subject:
Response to 10 CFR 21 Inquiry
Dear Sir or Madam:
In accordance with the reference correspondence and 10 CFR 21,
Boeing is sending the NRC the attached error notice(s) received
from our former software suppliers. Because of unknown current
addresses, the following former customers were not notified:
Reactor Controls, Inc.
Echo Energy Consultants, Inc.
Nuclear Applications and Systems Analysis Company (Japan)
Nuclear Power Services
Error notices have been sent to our other former customers.
Very truly yours,
Sandra J. Andrews
Nuclear Administrator
G-1151 M/S 7A-33
(206) 865-6248
Attachment(s): GTICES Program Report Forms Nos. 95.16, 95.17
and 95.18
Georgia Tech Computer Aided Structural Engineering Center
Georgia Institute of Technology
School of Civil & Environmental Engineering
Atlanta, Georgia 30332-0355
USA
404 o 894 o 2260
404 o 894 o 80141 FAX
AUG 28 1995
CONTRACTS
August 21, 1995
Attention: Nuclear Administrator
Boeing Information & Support Services
P.O. Box 24346, M/S 7A-33
Seattle, Washington 98124-0346
RE: GT STRUDL
Dear Sir or Madam:
Enclosed please find copies of GTICES PROGRAM REPORT FORMS Nos. 95.16
thru 95.18 and a VENDOR ACKNOWLEDGEMENT FORM. Please sign and return the
VENDOR ACKNOWLEDGEMENT FORM to acknowledge receipt of the GTICES Program
Report.
Thank you for reviewing the Program Report and for returning the
Acknowledgement Form.
Best regards,
CASE Center
Catherine Lee
Configuration Control Manager
CL/jhb
Enclosures
GTSTRUDL Program Report Form
GPRF No.: 95.16
DATE: August 21, 1995
FROM: Computer-Aided Structural Engineering Center
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
SEVERITY LEVEL:
_ URGENT Problem results in incorrect answers which may not be
apparent or job aborts and cannot be recovered within the
session or job.
_ SERIOUS Problem results in incorrect answers which are obvious or
problem prevents completion of a particular user's task.
_ MINOR Problem can be worked around or problem poses high
frustration factor.
x INFORMATIVE Documentation error, program usage tip, user
inconveniences.
Date Problem Confirmed August 21, 1995
Date Notification Sent August 23, 1995
Computers VAX, PC
Operating System VMS, DOS
Version 9301 VAX, 9401 VAX and 9401 PC
Target Release for Correction 95.01
Configuration Control Manager
Signature Title
R & D Division
Catherine Lee August 21, 1995
Typed or Printed Name Date of Signature
Signature Title
Professional Services Division
Typed or Printed Name Date of Signature
Rev. 2.2
GTSTRUDL Program Report Form
(Continued)
GPRF No.: 95.16
DATE: August 21, 1995
DESCRIPTION:
For 9301 VAX, 9401 VAX and 9401 PC Verification Manual, there is a
typo in section 1.8 "Frame Analysis Verification Problem #8". In Table
1.8-1 "Comparison for Verification Problem #8", on page 1.8-3, the Moment
x reaction at joint 1 (M sub 1x,) for GTSTRUDL result should be "-227.413
k-in" instead of "227.413 k-in".
Rev. 2.2
GTSTRUDL Program Report Form
GPRF No.: 95.17
DATE: August 21, 1995
FROM: Computer-Aided Structural Engineering Center
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
SEVERITY LEVEL:
x URGENT Problem results in incorrect answers which may not be
apparent or job aborts and cannot be recovered within the
session or job.
_ SERIOUS Problem results in incorrect answers which are obvious or
problem prevents completion of a particular user's task.
_ MINOR Problem can be worked around or problem poses high
frustration factor.
_ INFORMATIVE Documentation error, program usage tip, user
inconveniences.
Date Problem Confirmed August 21, 1995
Date Notification Sent August 23, 1995
Computers All
Operating System All
Version 9001 thru 9501
Target Release for Correction 9601
Director
Signature Title
R & D Division
Kenneth Will August 21, 1995
Typed or Printed Name Date of Signature
Signature Title
Professional Services Division
Typed or Printed Name Date of Signature
Rev. 2.2
GTSTRUDL Program Report Form
(Continued)
GPRF No.: 95.17
DATE: August 21, 1995
DESCRIPTION:
Linear varying LINE LOADS created in GTModeler for elements which have
midside nodes on the loaded edge (IPQQ, IPQLQ4, IPQLQ1, IPQLQ2, IPQLQ2B,
IPQLQ3) are translated into GTSTRUDL incorrectly and also generated
incorrectly if the GENERATE INPUT file menu is picked. The incorrectly
translated linear varying loads may be verified using the LIST SUM
REACTIONS command after a STIFFNESS ANALYSIS or by returning to GTModeler
and using the DISPLAY LOAD menu. Note that the loads will appear to have
been generated correctly if they are displayed using DISPLAY LOAD before
returning to Command Mode or generating an input file.
Workaround:
Do not use GTMODELER to create linear varying LINE LOADS for elements
which contain midside nodes. Return to command mode and using the
ELEMENT LOAD command to specify EDGE FORCES.
Applicable Section of the Documentation:
GTMODELER - Volume 6 of the GTSTRUDL Users Manual
LINE LOADS - Section 11.2
DISPLAY LOAD - Section 6.5
Volume 3 of the GTSTRUDL Users Manual
EDGE FORCES for Isoparametric Elements - Section 2.3.5.4.2.1
Rev. 2.2
GTSTRUDL Program Report Form
GPRF No.: 95.18
DATE: August 21, 1995
FROM: Computer-Aided Structural Engineering Center
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
SEVERITY LEVEL:
x URGENT Problem results in incorrect answers which may not be apparent
or job aborts and cannot be recovered within the session or
job.
_ SERIOUS Problem results in incorrect answers which are obvious or
problem prevents completion of a particular user's task.
_ MINOR Problem can be worked around or problem poses high frustration
factor.
_ INFORM- Documentation error, program usage tip, user
ATIVE inconveniences.
Date Problem Confirmed August 21, 1995
Date Notification Sent August 23, 1995
Computers All
Operating System All
Version 9001 thru 9501
Target Release for Correction 9601
Director, R&D
Signature Title
R & D Division
Kenneth Will August 21, 1995
Typed or Printed Name Date of Signature
Signature Title
Professional Services Division
Typed or Printed Name Date of Signature
Rev. 2.2
GTSTRUDL Program Report Form
(Continued)
GPRF No.: 95.18
DATE: August 21, 1995
DESCRIPTION:
INERTIA LOADS (self-weight) created in GTModeler for the TRANS3D
TRIDIMENSIONAL element are incorrect. The error may be verified using
the DISPLAY LOAD menu or the CHECK MODEL menu using the CHK LD SUM menu
pick. The LIST SUM REACTIONS command may also be used after a STIFFNESS
ANALYSIS to verify that the reactions are incorrect.
Workaround:
Do not use GTMODELER to create INERTIA LOADS if the model contains
TRANS3D elements. Return to command mode and using the ELEMENT LOAD
command to specify BODY FORCES for all the elements in the model.
Applicable Section of the Documentation:
GTMODELER - Volume 6 of the GTSTRUDL Users Manual
INERTIA LOADS - Section 11.1
DISPLAY LOAD - Section 6.5
CHECK MODEL - Section 14
Volume 3 of the GTSTRUDL Users Manual
BODY FORCES for Isoparametric Elements - Section 2.3.5.4.2.3
Rev. 2.2
*** END OF DOCUMENT ***
Page Last Reviewed/Updated Wednesday, March 24, 2021