Physical Security Best Practices for the Protection of Risk-Significant Radioactive Material (NUREG-2166)
On this page:
Download complete document
Manuscript Completed: May 2014
Date Published: May 2014
A. Gaudreau1, P. Goldberg1, S. Hawkins1, J. Katanic1,
W. Lee1, G. Purdy2, D. White2, F. Pavlechko3, A. True3,
C. Gordon4, R. Ragland4, K. Lambert5, and J. Thompson6
1Office of Federal and State Materials and Environmental Management Programs
2Office of Nuclear Security and Incident Response
3Office of Chief Human Capital Officer Training and Development
Duane White, NRC Project Manager
Office of Federal and State Materials and Environmental Management Programs
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001
This document provides guidance to U.S. Nuclear Regulatory Commission (NRC) licensees or applicants on developing and implementing a physical protection program for the protection of risk-significant radioactive materials (e.g., category 1 and category 2 quantities of radioactive material). The intent of this information is to provide NRC licensees or applicants guidance with specific emphasis on physical security best practices. The approaches and methods in this document are not requirements; however, the NRC considers them to be acceptable for complying with the requirements in Title 10 of the Code of Federal Regulations (10 CFR) Part 37, "Physical Protection of Category 1 and Category 2 Quantities of Radioactive Material."
Paperwork Reduction Act Statement
This NUREG contains information collection requirements associated with 10 CFR Part 37 that are subject to the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.). These information collections were approved by the Office of Management and Budget (OMB), approval number 3150-0214.
Public Protection Notification
The NRC may not conduct or sponsor, and a person is not required to respond to, a request for information or an information collection requirement unless the requesting document displays a currently valid OMB control number.