Part 21 Report - 1998-132

ACCESSION #: 9801290049 The Boeing Company P.O. Box 3707 Seattle, WA 98124-2207 BOEING January 22, 1998 G-1151-SJA-98-049 Document Control Desk United States Nuclear Regulatory Commission Washington, D.C. 20555 Reference: a) Boeing Letter G-1151-RSO-92-365 dated August 31, 1992; R. S. Orr to the NRC Operations Center b) NRC Letter Docket No. 99901227 dated August 12, 1992; L. J. Norrholm to R. S. Orr; Subject: Response to 10 CFR 21 Inquiry Dear Sir or Madam: In accordance with the reference correspondence and 10 CFR 21, Boeing is sending the NRC the attached error notice(s) received from our former software suppliers. Because of unknown current addresses, the following former customers were not notified: Reactor Controls, Inc. Echo Energy Consultants, Inc. Nuclear Applications and Systems Analysis Company (Japan) Nuclear Power Services Error notices have been sent to our other former customers. Very truly yours, Sandra J. Andrews Nuclear Administrator Phone: (425) 865-6248 FAX: (425) 865-4851 Mail Stop: 7A-33, or e-mail: Sandra.J.Andrews@Boeing.com Enclosure(s): GTSTRUDL Program Report Form 98.01 Georgia Institute of Technology GT STRUDL [Registered Trademark] January 15, 1998 Attention: Nuclear Administrator Boeing Information & Support Services P.O. Box 24346, M/S 7A-33 Seattle, Washington 98124-0346 RE: GT STRUDL Dear Sir or Madam: Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM 98.01, and a GTSTRUDL QA CUSTOMER ACKNOWLEDGEMENT FORM. Please sign and return the GTSTRUDL QA CUSTOMER ACKNOWLEDGEMENT FORM to acknowledge receipt of the GTSTRUDL Program Report. Thank you for reviewing the Program Report and for returning the Acknowledgement Form. Best regards, CASE Center David C. Key Configuration Control Manager Enclosures Computer Aided Structural Engineering Center Phone: (404) 894-2260 School of Civil & Environmental Engineering Fax: (404) 894-8014 Atlanta, Georgia 30332-0355 USA casec@ce.gatech.edu A Unit of the University System of Georgia GTSTRUDL Program Report Form GPRF No.: 98.01 DATE: FROM: Computer-Aided Structural Engineering Center Georgia Institute of Technology Atlanta, Georgia 30332-0355 SEVERITY LEVEL: X URGENT Problem results in incorrect answers which may not be apparent or job aborts and cannot be recovered within the session or job. _ SERIOUS Problem results in incorrect answers which are obvious or problem prevents completion of a particular user's task. _ MINOR Problem can be worked around or problem poses high frustration factor. _ INFORMATIVE Documentation error, program usage tip, user inconveniences. Date Problem Confirmed January 12, 1998 Date Notification Sent Computers PC (DOS,NT,95), VAX,SUN,HP,RS Operating System see "Computers" above Version 93.01, 94.01, 96.01, 97.01 Target Release for Correction 1998.2 Mgr. ASD Signature Title R & D Division Michael H. Swanger Typed or Printed Name Date of Signature Signature Title Professional Services Division Typed or Printed Name Date of Signature Rev. 2.2 GTSTRUDL Program Report Form (Continued) GPRF No.: DATE: DESCRIPTION: The COMPUTE GROSS RESULTS command will abort if joint displacements have not been previously computed by the COMPUTE ALL DISPLACEMENTS command. This will occur in the offshore analysis and design pile- structure interaction analysis if the super element used to create the stiffness matrix at the pile-structure boundary joints does not contain all the active members in the structure. The super element must contain all active members/elements in the structure and the set of active members/elements may not be changed prior to giving the COMPUTE GROSS RESULTS command subsequent to the pile analysis. GTSTRUDL User Reference Manual Sections: ACTIVE/INACTIVE Structure Specification Section 2.1.3.4, Volume 1, Rev. D The Split Solver Commands for Static Section 2.1.13.3, Volume 1, Analysis Rev. P Guidelines for Pile-Structure Analysis Section 6.7, Volume 8, Rev. M Rev. 2.2 *** END OF DOCUMENT ***

Page Last Reviewed/Updated Wednesday, March 24, 2021