Part 21 Report - 1997-058

 
 

ACCESSION #: 9706100458



                    Information & Support Services

                    P.O. Box 3707

                    Seattle, WA 98124-2207



BOEING



June 5, 1997

G-1151-SJA-97-258



Document Control Desk

United States Nuclear Regulatory Commission

Washington, D.C.  20555



Reference: 

a) Boeing Letter G-1151-RSO-92-365 dated August 31, 1992; R. S. Orr to the NRC Operations Center

b) NRC Letter Docket No. 99901227 dated August 12, 1992; L. J. Norrholm to R. S. Orr; Subject: Response to 10 CFR 21 Inquiry



Dear Sir or Madam:



In accordance with the reference correspondence and 10 CFR 21, Boeing is sending the NRC the attached error notice(s) received from our former software suppliers.  Because of unknown current addresses, the following former customers were not notified:



     Reactor Controls, Inc.



     Echo Energy Consultants, Inc.



     Nuclear Applications and Systems Analysis Company (Japan) 

     Nuclear Power Services



Error notices have been sent to our other former customers. 

Very truly yours,





Sandra J. Andrews

Nuclear Administrator

Phone: (206) 865-6248

FAX: (206) 865-4851

Mail Stop: 7A-33, or

e-mail: Sandra.Andrews@PSS.Boeing.com



Enclosure(s): GTSTRUDL Program Report Form No. 97.04





Georgia Institute

  of Technology                         GT STRUDL [Registered Trademark] 



May 29, 1997



Attention: Nuclear Administrator

Boeing Information & Support Services

P.O. Box 24346, M/S 7A-33

Seattle, Washington 98124-0346



RE: GT STRUDL



Dear Sir or Madam:



Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM No. 97.04 and a VENDOR ACKNOWLEDGMENT FORM.
Please sign and return the VENDOR ACKNOWLEDGMENT FORM to acknowledge receipt of the GTSTRUDL Program Report.



Thank you for reviewing the Program Report and for returning the Acknowledgment Form.



Best regards,

CASE Center





Lawrence F. Kahn

Director



LFK/tlk

Enclosures





Computer Aided Structural Engineering Center
Phone: (404) 894-2260 School of Civil & Environmental Engineering
Fax: (404) 894-8014 Atlanta, Georgia 30332-0355 USA
casec@ce.gatech.edu 

               A Unit of the University System of Georgia





                      GTSTRUDL Program Report Form



                                                  GPRF No.: 

                                                      DATE: 

FROM:     Computer-Aided Structural Engineering Center

          Georgia Institute of Technology

          Atlanta, Georgia 30332-0355



SEVERITY LEVEL:



URGENT		Problem results in incorrect answers which may not be apparent or job aborts and cannot be recovered within the session or job.



SERIOUS		Problem results in incorrect answers which are obvious or problem prevents completion of a                     particular user's task.



MINOR		Problem can be worked around or problem poses high frustration factor.



INFORMATIVE		Documentation error, program usage tip, user inconveniences.



Date Problem Confirmed



Date Notification Sent



Computers



Operating System



Version



Target Release for Correction





Signature                                    Title

R & D Division





Typed or Printed Name                        Date of Signature 



Signature                                    Title

Professional Services Division





Typed or Printed Name                        Date of Signature 

                                                                  Rev 2.2 



                      GTSTRUDL Program Report Form

                               (Continued)

                                                       GPRF No.: 

                                                           DATE: 

DESCRIPTION:



If a GTSTRUDL/RC "CHECK FOR COLUMN" command is given with current units of MM and KG, CM and KG, MM and NEWT, or CM and NEWT, an abort will occur.



CHECK commands for beam options (FLEXURE, SHEAR, BOND and DEVELOPMENT) and all CHECK commands with non-metric units (INCHES, FEET, POUNDS, KIPS) are unaffected.



Workaround:    Specify units as METER when CHECKing a column with metric                units





Reference:     Section 7.3 "The CHECK MEMBER command", Volume 4, GTSTRUDL                Users Manual.



                                                                  Rev 2.2 



*** END OF DOCUMENT ***