United States Nuclear Regulatory Commission - Protecting People and the Environment


ACCESSION #: 9710070204



                         Information & Support Services

                         P.O.  Box 3707

                         Seattle, WA 98124-2207



October 1, 1997

G-1151-SJA-97-453



Document Control Desk

United States Nuclear Regulatory Commission

Washington, D.C. 20555



Reference:     a)   Boeing Letter G-1151-RSO-92-365 dated August 31,

                    1992; R. S. Orr to the NRC Operations Center



               b)   NRC Letter Docket No.  99901227 dated August 12,

                    1992; L. J. Norrholm to R. S. Orr; Subject: Response

                    to 10 CFR 21 Inquiry



Dear Sir or Madam:



In accordance with the reference correspondence and 10 CFR 21, Boeing is

sending the NRC the attached error notice(s) received from our former

software suppliers.  Because of unknown current addresses, the following

former customers were not notified:



     Reactor Controls, Inc.



     Echo Energy Consultants, Inc.



     Nuclear Applications and Systems Analysis Company (Japan)



     Nuclear Power Services



Error notices have been sent to our other former customers.



Very truly yours,



Sandra J.  Andrews

Nuclear Administrator

Phone: (206) 865-6248

FAX: (206) 865-4851

Mail Stop: 7A-33, or

e-mail: Sandra.Andrews@PSS.Boeing.com



Enclosure(s): GTSTRUDL Program Report form 97.16



Georgia Institute

of Technology                                 GT STRUDL [Registered copy]



September 22, 1997



Attention: Nuclear Administrator

Boeing Information & Support Services

P.O.Box 24346, M/S 7A-33

Seattle, Washington 98124-0346



RE: GT STRUDL



Dear Sir or Madam:



Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM 97.16 and a

GTSTRUDL QA CUSTOMER ACKNOWLEDGEMENT FORM.  Please sign and return the

GTSTRUDL QA CUSTOMER ACKNOWLEDGEMENT FORM to acknowledge receipt of the

GTSTRUDL Program Report.



Thank you for reviewing the Program Report and for returning the

Acknowledgement Form.



Best regards,

CASE Center



David C.  Key

Configuration Control Manager



Enclosures



Computer Aided Structural Engineering Center        Phone: (404) 894-2260

School of Civil & Environmental Engineering           Fax: (404) 894-8014

Atlanta, Georgia 30332-0355 USA                       casec@ce.gatech.edu



               A Unit of the University System of Georgia



                      GTSTRUDL Program Report Form



                                             GPRF No.:



                                                  DATE:



FROM:     Computer-Aided Structural Engineering Center

          Georgia Institute of Technology

          Atlanta, Georgia 30332-0355



SEVERITY LEVEL:



x URGENT       Problem results in incorrect answers which may not be

               apparent or job aborts and cannot be recovered within the

               session or job.



_ SERIOUS      Problem results in incorrect answers which are obvious or

               problem prevents completion of a particular user's task.



_ MINOR        Problem can be worked around or problem poses high

               frustration factor.



_ INFORMATIVE  Documentation error, program usage tip, user

               inconveniences.



Date Problem Confirmed

Date Notification Sent

Computers

Operating System

Version

Target Release for Correction



Signature                                    Title

R & D Division



Typed or Printed Name                        Date of Signature



Signature                                    Title

Professional Services Division



Typed or Printed Name                        Date of Signature



                                                                  Rev 2.2



                      GTSTRUDL Program Report Form

                               (Continued)



                                             GPRF No.:



                                                  DATE:

DESCRIPTION:



     In GTMenu, in the Create Individual Element Incidences menu or the

     Create Joints and Elements in a Plane menu, or the Edit Element

     Incidences menu, if a blank Element Type is selected from the

     Element Dictionary, GTSTRUDL aborts.



     There is no work-around currently.  Do not select a blank Element

     Type from the Element Dictionary.



     Relevant documentation:

          GTSTRUDL User's Manual, volume 6, section 10.3.1

          GTSTRUDL User's Manual, volume 6, section 13.4.3



                                                                 Rev. 2-2



*** END OF DOCUMENT ***



Page Last Reviewed/Updated Thursday, March 29, 2012