Part 21 Report - 1997-057
ACCESSION #: 9705140292
Information & Support Services
P.O. Box 3707
Seattle, WA 98124-2207
May 6, 1997
G-1151-SJA-97-202
Document Control Desk
United States Nuclear Regulatory Commission
Washington, D.C. 20555
Reference: a) Boeing Letter G-1151-RSO-92-365 dated August 31,
1992; R. S. Orr to the NRC Operations Center
b) NRC Letter Docket No. 999010227 dated August 12,
1992; L. J. Norrholm to R. S. Orr; Subject: Response
to 10 CFR 21 Inquiry
Dear Sir or Madam:
In accordance with the reference correspondence and 10 CFR 21, Boeing is
sending the NRC the attached error notice(s) received from our former
software suppliers. Because of unknown current addresses, the following
former customers were not notified:
Reactor Controls, Inc.
Echo Energy Consultants, Inc.
Nuclear Applications and Systems Analysis Company (Japan)
Nuclear Power Services
Error notices have been sent to our other former customers.
Very truly yours,
Sandra J. Andrews
Nuclear Administrator
Phone: (206) 865-6248
FAX: (206) 865-4851
Mail Stop: 7A-33, or
e-mail: Sandra.Andrews@PSS.Boeing.com
Enclosure(s): Reissue of GTSTRUDL Program Report Form 97.03
Georgia Institute
of Technology GTSTRUDL [Registered Copy]
MAY 06 1997
April 29, 1997 CONTRACTS
Attention: Nuclear Administrator
Boeing Information & Support Services
P.O. Box 24346, M/S 7A-33
Seattle, Washington 98124-0346
RE: GT STRUDL
Dear Sir or Madam:
It was recently brought to our attention that the April 14, 1997
mailing of GPRF 97.03 was sent out with an incorrect cover letter. In
response, we are reissuing GPRF 97.03 in order to ensure proper
reporting. As this mailing replaces the previous issue of GPRF 97.03. I
request that you return the current Vendor Acknowledgment Form even if we
have already received the Form from the previous mailing. I apologize
for any inconvenience this may have caused, and thank you for your
assistance in the handling of this matter.
Best Regards,
CASE Center
David C. Key
Configuration Control Manager
c: Lawrence F. Kahn, Director
Enclosures
Computer Aided Structural Engineering Center Phone: (404) 894-2260
School of Civil & Environmental Engineering Fax: (404) 894-8014
Atlanta, Georgia 30332-0355 USA casec@cc.gatech.edu
A Unit of the University System of Georgia
Georgia Institute
of Technology GTSTRUDL [Registered Copy]
MAY 06 1997
April 29, 1997 CONTRACTS
Attention: Nuclear Administrator
Boeing Information & Support Services
P.O. Box 24346, M/S 7A-33
Seattle. Washington 98124-0346
RE: GT STRUDL
Dear Sir or Madam:
Enclosed please rind copies of GTSTRUDL PROGRAM REPORT FORM No.
97.03 and a VENDOR ACKNOWLEDGMENT FORM. Please sign and return the
VENDOR ACKNOWLEDGMENT FORM to acknowledge receipt of the GTSTRUDL Program
Report.
Thank you for reviewing the Program Report and for returning the
Acknowledgment Form.
Best regards,
CASE Center
Lawrence F. Kahn
Director
LFK/tlk
Enclosures
Computer Aided Structural Engineering Center Phone: (404) 894-2260
School of Civil & Environmental Engineering Fax: (404) 894-8014
Atlanta, Georgia 30332-0355 USA casec@cc.gatech.edu
A Unit of the University System of Georgia
GTSTRUDL Program Report Form
GPRF No.:
DATE:
FROM: Computer-Aided Structural Engineering Center
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
SEVERITY LEVEL:
X URGENT Problem results in incorrect answers which may not be
apparent or job aborts and cannot be recovered within the
session or job.
_ SERIOUS Problem results in incorrect answers which are obvious or
problem prevents completion of a particular user's task.
_ MINOR Problem can be worked around or problem poses high
frustration factor.
_ INFORMATIVE Documentation error, program usage tip, user
inconveniences.
Date Problem Confirmed
Date Notification Sent
Computers All
Operating System All
Version 94.01 and later
Target Release for Correction 97.01 NT
Mgr. ASD
Signature Title
R & D Division
Michael H. Swanger
Typed or Printed Name Date of Signature
Signature Title
Professional Services Division
Typed or Printed Name Date of Signature Rev 22
GTSTRUDL Program Report Form
(Continued)
GPRF No.:
DATE:
DESCRIPTION:
Specifying elastic member end connection spring constant data in CHANGES
mode may cause a subsequent STIFFNESS ANALYSIS to abort or produce
incorrect results.
Work around:
Give the PRINT MEMBER RELEASES command following the MEMBER RELEASES
command in CHANGES mode and prior to the STIFFNESS ANALYSIS command:
CHANGES
MEMBER RELEASES
1 TO 10 START ELASTIC KMZ 1000.0
ADDITIONS
PRINT MEMBER RELEASES
o
o
o
STIFFNESS ANALYSIS
Applicable sections of the User's Manual
MEMBER RELEASES Command Section 2.1.8.2, Volume 1
Rev. 22
*** END OF DOCUMENT ***
Page Last Reviewed/Updated Wednesday, March 24, 2021