United States Nuclear Regulatory Commission - Protecting People and the Environment

ACCESSION #: 9608280084

Information & Support Services
P.O.  Box 3707
Seattle, WA 98124-2207


August 20, 1996

Document Control Desk
United States Nuclear Regulatory Commission
Washington, D.C.  20555

Reference: a)  Boeing Letter G-1151-RSO-92-365 dated August 31, 19921 R.
               S.  Orr to the NRC Operations Center

           b)  NRC Letter Docket No.  99901227 dated August 12, 1992; L.
               J.  Norrholm to R.  S.  Orr; Subject: Response to 10 CFR
               21 Inquiry

Dear Sir or Madam:

In accordance with the reference correspondence and 10 CFR 21, Boeing is
sending the NRC the attached error notice(s) received from our, former
software suppliers.  Because of unknown current addresses, the following
former customers were not notified:

     Reactor Controls, Inc.

     Echo Energy Consultants, Inc.

     Nuclear Applications and Systems Analysis Company (Japan)

     Nuclear Power Services

     Tenera Engineering Services Gibbs & Hill, Inc.

Error notices have been sent to our other former customers.

Very truly yours,

Sandra J.  Andrews
Nuclear Administrator
Phone: (206) 865-6248
FAX: (206) 865-4851
Mail Stop: 7A-33, or
e-mail: Sandra.Andrews@PSS.Boeing.com

Attachment(s): GTSTRUDL Program Report Form No.  96.20

Georgia Tech             Computer Aided Structural Engineering Center
                         Georgia Institute of Technology
                         School of Civil & Environmental Engineering
                         Atlanta, Georgia 30332-0355
                         404 o 894 o 2260
                         404 o 894 o 8014 FAX

August 8, 1996

Attention: Nuclear Administrator
Boeing Information & Support Services
P.O.Box 24346, M/S 7A-33
Seattle, Washington 98124-0346


Dear Sir or Madam:

Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM No.  96.20
and a VENDOR ACKNOWLEDGEMENT FORM.  Please sign and return the VENDOR
ACKNOWLEDGEMENT FORM to acknowledge receipt of the GTSTRUDL Program

Thank you for reviewing the Program Report and for returning the
Acknowledgement Form.

Best regards,
CASE Center

Catherine Lee
Configuration Control Manager


An Equal Education and Employment Opportunity Institution

A Unit of the University System of Georgia

                      GTSTRUDL Program Report Form

                                                  GPRF No.: 96.20

                                                  DATE: August 7, 1996

FROM:     Computer-Aided Structural Engineering Center
          Georgia Institute of Technology
          Atlanta, Georgia 30332-0355


x URGENT       Problem results in incorrect answers which may not be
               apparent or job aborts and cannot be recovered within the
               session or job.

_ SERIOUS      Problem results in incorrect answers which are obvious or
               problem prevents completion of a particular user's task.

_ MINOR        Problem can be worked around or problem poses high
               frustration factor.

_ INFORMATIVE  Documentation error, program usage tip, user

Date Problem Confirmed August 7, 1996

Date Notification Sent August 9, 1996

Computers All

Operating System All

Version  All versions prior to and including 96.01

Target Release for Correction 96.03

                                        Director, ASD
Signature                               Title
R & D Division

Kenneth Will                            August 7, 1996
Typed or Printed Name                   Date of Signature

Signature                               Title
Professional Services Division

Typed or Printed Name                   Date of Signature

                                                                Rev.  2.2

                      GTSTRUDL Program Report Form

                                                  GPRF No.: 96.20

                                                  DATE: August 7, 1996

The SECTION and LIST SECTION commands issued between two successive
NONLINEAR ANALYSIS CONTINUE commands will cause the second NONLINEAR
ANALYSIS CONTINUE command to abort:





     SECTION FRACTIONAL NS 3 0.0 0.5 1.0




     NONLINEAR ANALYSIS CONTINUE (this command will abort)

There is no work around other than remove the SECTION and LIST SECTION

Applicable sections of the User's Manual:

     The SECTION Command                Section, Vol.1
     Internal Member Results Output--
     The LIST Command                   Section, Vol.1

     The NONLINEAR ANALYSIS Command     Section 2.5.5, Vol.3

                                                                 Rev. 2.2


Page Last Reviewed/Updated Wednesday, February 12, 2020