United States Nuclear Regulatory Commission - Protecting People and the Environment

ACCESSION #: 9506140411

                           The Boeing Company
                              P.O. Box 3707
                         Seattle, WA 98124-2207

BOEING

June 6, 1995
G-1151-RSO-95-232

Document Control Desk
United States Nuclear Regulatory Commission
Washington, D.C. 20555

Reference: a)  Boeing Letter G-1151-RSO-92-365 dated August 31, 1992;
               R. S. Orr to the NRC Operations Center

           b)  NRC Letter Docket No. 99901227 dated August 12, 1992; L.
               J. Norrholm to R. S. Orr; Subject: Response to 10 CFR 21
               Inquiry

Dear Sir or Madam:

In accordance with the reference correspondence and 10 CFR 21, Boeing is
sending the NRC the attached error notice(s) received from our former
software suppliers.  Because of unknown current addresses, the following
former customers were not notified:

     Reactor Controls, Inc.

     Echo Energy Consultants, Inc.

     Nuclear Applications and Systems Analysis Company (Japan)

     Nuclear Power Services

Error notices have been sent to our other former customers.

Very truly yours,

R. S. Orr
Nuclear Administrator
G-1151 M/S 7A-33
(206) 865-6248

Attachment(s): GTICES Program Report Form No. 95.13

Georgia Tech                  Computer Aided Structural
                              Engineering Center

                              Georgia Institute of Technology
                              School of Civil & Environmental Engineering
                              Atlanta, Georgia 30332-0355
                              USA
                              404 o 894 o 2260
                              404 o 894 o 8014 FAX

June 1, 1995

Attention: Nuclear Administrator                  JUN 06 1995
Boeing Computer Services
P.O. Box 24346, M/S 7A-33
Seattle, Washington 98124-0346

RE: GT STRUDL

Dear Sir or Madam:

Enclosed please find a copy of GTICES PROGRAM REPORT FORM No. 95.13 and a
VENDOR ACKNOWLEDGEMENT FORM.  Please sign and return the VENDOR
ACKNOWLEDGEMENT FORM to acknowledge receipt of the GTICES Program Report.

Thank you for reviewing the Program Report and for returning the
Acknowledgement Form.

Best regards,
CASE Center

Catherine Lee
Configuration Control Manager

CL/jhb
Enclosures

                      GTSTRUDL Program Report Form

                                                  GPRF No.: 95.13

                                                  DATE: June 1, 1995

FROM:     Computer-Aided Structural Engineering Center
          Georgia Institute of Technology
          Atlanta, Georgia 30332-0355

SEVERITY LEVEL:

- URGENT       Problem results in incorrect answers which may not be
               apparent or job aborts and cannot be recovered within the
               session or job.

- SERIOUS      Problem results in incorrect answers which are obvious or
               problem prevents completion of a particular user's task.

x MINOR        Problem can be worked around or problem poses high
               frustration factor.

- INFORMATIVE  Documentation error, program usage tip, user
               inconveniences.

Date Problem Confirmed June 1, 1995

Date Notification Sent June 2, 1995

Computers      All

Operating System    All

Version        93.01 and later.

Target Release for Correction      95.02

                                        Manager, ASD
Signature                               Title
R & D Division

Michael H. Swanger                      June 1, 1995
Typed or Printed Name                   Date of Signature

Signature                               Title
Professional Services Division

Typed or Printed Name                   Date of Signature

                                                            Rev 2.2

                      GTSTRUDL Program Report Form
                               (Continued)

                                             GPRF No.: 95.13

                                               DATE: June 1, 1995

DESCRIPTION:

     The following sequence of commands has been known to cause an abort
in the STIFFNESS ANALYSIS command with the MONITOR option:

               STRUDL
                 .
                 .
                 .

               STIFFNESS ANALYSIS MONITOR

               STRUDL
                 .
                 .
                 .

               STIFFNESS ANALYSIS

               (abort)

Notice the start of a new job with the STRUDL command immediately
following the STIFFNESS ANALYSIS MONITOR command.  The second STIFFNESS
ANALYSIS command produces monitor output prior to the abort in spite of
the fact that the MONITOR option is not given.

Applicable sections of User's Manual:

     The STIFFNESS ANALYSIS command     Section 2.1.13.2, Volume 1

                                                       Rev. 2.2

*** END OF DOCUMENT ***

 
Page Last Reviewed/Updated Thursday, March 29, 2012