Event Notification Report for January 02, 2017
U.S. Nuclear Regulatory Commission
Operations Center
EVENT REPORTS FOR
01/01/2017 - 01/02/2017
Power Reactor
Event Number: 52472
Facility: LASALLE
Region: 3 State: IL
Unit: [1] [2] []
RX Type: [1] GE-5,[2] GE-5
NRC Notified By: MARK SMITH
HQ OPS Officer: MARK ABRAMOVITZ
Region: 3 State: IL
Unit: [1] [2] []
RX Type: [1] GE-5,[2] GE-5
NRC Notified By: MARK SMITH
HQ OPS Officer: MARK ABRAMOVITZ
Notification Date: 01/02/2017
Notification Time: 17:49 [ET]
Event Date: 01/02/2017
Event Time: 12:52 [CST]
Last Update Date: 01/02/2017
Notification Time: 17:49 [ET]
Event Date: 01/02/2017
Event Time: 12:52 [CST]
Last Update Date: 01/02/2017
Emergency Class: NON EMERGENCY
10 CFR Section:
50.72(b)(2)(xi) - OFFSITE NOTIFICATION
10 CFR Section:
50.72(b)(2)(xi) - OFFSITE NOTIFICATION
Person (Organization):
MARK JEFFERS (R3DO)
MARK JEFFERS (R3DO)
| Unit | SCRAM Code | RX Crit | Initial PWR | Initial RX Mode | Current PWR | Current RX Mode |
|---|---|---|---|---|---|---|
| 1 | N | Y | 100 | Power Operation | 100 | Power Operation |
| 2 | N | Y | 100 | Power Operation | 100 | Power Operation |
OFFSITE NOTIFICATION OF A MALFUNCTION OF TWO LASALLE COUNTY WARNING SIRENS
"At approximately 1403 (CST) on January 2, 2017, LaSalle County Station was informed by the LaSalle County Sheriff that two warning sirens had malfunctioned at approximately 1252 earlier this afternoon. The warning sirens had inadvertently operated for nearly 3 minutes during maintenance at the LaSalle County 911 Communications Center. The warning sirens have been restored to standby and are fully functional. No other emergency notification systems or sirens were affected.
"The licensee has notified the NRC Resident Inspector of the issue."
"At approximately 1403 (CST) on January 2, 2017, LaSalle County Station was informed by the LaSalle County Sheriff that two warning sirens had malfunctioned at approximately 1252 earlier this afternoon. The warning sirens had inadvertently operated for nearly 3 minutes during maintenance at the LaSalle County 911 Communications Center. The warning sirens have been restored to standby and are fully functional. No other emergency notification systems or sirens were affected.
"The licensee has notified the NRC Resident Inspector of the issue."
Part 21
Event Number: 52537
Rep Org: EMERSON PROCESS MANAGEMENT
Licensee: FISHER CONTROLS INTERNATIONAL LLC
Region: 3
City: MARSHALLTOWN State: IA
County:
License #:
Agreement: Y
Docket:
NRC Notified By: KIM SAGAR
HQ OPS Officer: DONG HWA PARK
Licensee: FISHER CONTROLS INTERNATIONAL LLC
Region: 3
City: MARSHALLTOWN State: IA
County:
License #:
Agreement: Y
Docket:
NRC Notified By: KIM SAGAR
HQ OPS Officer: DONG HWA PARK
Notification Date: 02/08/2017
Notification Time: 11:17 [ET]
Event Date: 01/02/2017
Event Time: 00:00 [CST]
Last Update Date: 02/08/2017
Notification Time: 11:17 [ET]
Event Date: 01/02/2017
Event Time: 00:00 [CST]
Last Update Date: 02/08/2017
Emergency Class: NON EMERGENCY
10 CFR Section:
21.21(d)(3)(i) - DEFECTS AND NONCOMPLIANCE 50.55(e) - CONSTRUCT DEFICIENCY
10 CFR Section:
21.21(d)(3)(i) - DEFECTS AND NONCOMPLIANCE 50.55(e) - CONSTRUCT DEFICIENCY
Person (Organization):
SHANE SANDAL (R2DO)
MICHAEL KUNOWSKI (R3DO)
PART 21/50.55 REACTO (EMAI)
SHANE SANDAL (R2DO)
MICHAEL KUNOWSKI (R3DO)
PART 21/50.55 REACTO (EMAI)
PART 21 - VALVE ASSEMBLY NONCONFORMANCE
"Subject: 3" Style HPNS Valve Body/Cage/Plug Retainer Binding
"Equipment Affected by this Fisher Information Notice: Items subject to this Fisher Information Notice (FIN) are confined to the equipment and orders
referred to in Appendix A attached. Specifically, affected equipment refers to the 3" style HPNS valve body for next-generation nuclear plants and its associated cage and plug retainer.
"Purpose: The purpose of this FIN is to alert affected customers that, as of 2 January 2017, Fisher Controls International LLC (Fisher) became aware of a situation which may affect the performance of the aforementioned equipment, including its safety-related function. Fisher is informing affected customers of this circumstance in accordance with Section 21.21(b) of 10 CFR 21.
"Applicability: This FIN applies only to the equipment identified in Appendix A, which lists serial numbers and order numbers that were delivered to customers. Specifically, it applies to the Fisher 3 style HPNS valve body assembly, sold to AP1000 next generation plant sites, Commodity Package PV14, Datasheet 111.
"Discussion: During plant hot functional testing, certain valve assemblies did not achieve full travel. Upon disassembly, site inspection found wear between the cage and plug retainer in some valves. Vertical scratches in the cage internal diameter and plug retainer outside diameter was confirmation of galling which prohibited full travel. In one valve, the cage could not be removed from the body as it was friction-welded due to galling.
"The valve body-to-cage interference is attributed to body-to-bonnet gasket compression which caused the valve body gasket groove to distort/yield, particularly the cage guide internal diameter bore. Regarding the cage-to-plug retainer binding, thermal expansion calculations
between cage internal diameter and plug retainer outside diameter indicate an undersized diametrical clearance at temperature.
"Extent of Condition: In addition to the equipment listed in Appendix A, all other style HPNS designs (NPS 1/2, 1, 2, 3, 4, 6, and 8) were examined for extent of condition. Results indicate that DS111 was a lone outlier and this issue is not expected to occur for the other sizes, material combinations and datasheets sold into their respective applications and temperatures. Arrangements have been made with the customers to replace or maintenance the trim for the equipment listed in Appendix A. In addition, a Corrective Action Request (CAR 1817) has been initiated by Fisher to prevent reoccurrence of this issue.
"10 CFR 21 Implications: Fisher requests that the recipient of this FIN review it and take appropriate action in accordance with 10 CFR 21. If there are any technical questions or concerns, please contact: Ben Ahrens, Quality Manager, Emerson Automation Solutions, Fisher Controls International LLC, 301 South First Avenue, Marshalltown, IA 50158, Phone: (641) 754-2249, F (641) 754-2830."
"Subject: 3" Style HPNS Valve Body/Cage/Plug Retainer Binding
"Equipment Affected by this Fisher Information Notice: Items subject to this Fisher Information Notice (FIN) are confined to the equipment and orders
referred to in Appendix A attached. Specifically, affected equipment refers to the 3" style HPNS valve body for next-generation nuclear plants and its associated cage and plug retainer.
"Purpose: The purpose of this FIN is to alert affected customers that, as of 2 January 2017, Fisher Controls International LLC (Fisher) became aware of a situation which may affect the performance of the aforementioned equipment, including its safety-related function. Fisher is informing affected customers of this circumstance in accordance with Section 21.21(b) of 10 CFR 21.
"Applicability: This FIN applies only to the equipment identified in Appendix A, which lists serial numbers and order numbers that were delivered to customers. Specifically, it applies to the Fisher 3 style HPNS valve body assembly, sold to AP1000 next generation plant sites, Commodity Package PV14, Datasheet 111.
"Discussion: During plant hot functional testing, certain valve assemblies did not achieve full travel. Upon disassembly, site inspection found wear between the cage and plug retainer in some valves. Vertical scratches in the cage internal diameter and plug retainer outside diameter was confirmation of galling which prohibited full travel. In one valve, the cage could not be removed from the body as it was friction-welded due to galling.
"The valve body-to-cage interference is attributed to body-to-bonnet gasket compression which caused the valve body gasket groove to distort/yield, particularly the cage guide internal diameter bore. Regarding the cage-to-plug retainer binding, thermal expansion calculations
between cage internal diameter and plug retainer outside diameter indicate an undersized diametrical clearance at temperature.
"Extent of Condition: In addition to the equipment listed in Appendix A, all other style HPNS designs (NPS 1/2, 1, 2, 3, 4, 6, and 8) were examined for extent of condition. Results indicate that DS111 was a lone outlier and this issue is not expected to occur for the other sizes, material combinations and datasheets sold into their respective applications and temperatures. Arrangements have been made with the customers to replace or maintenance the trim for the equipment listed in Appendix A. In addition, a Corrective Action Request (CAR 1817) has been initiated by Fisher to prevent reoccurrence of this issue.
"10 CFR 21 Implications: Fisher requests that the recipient of this FIN review it and take appropriate action in accordance with 10 CFR 21. If there are any technical questions or concerns, please contact: Ben Ahrens, Quality Manager, Emerson Automation Solutions, Fisher Controls International LLC, 301 South First Avenue, Marshalltown, IA 50158, Phone: (641) 754-2249, F (641) 754-2830."