Home > NRC Library > ADAMS Public Documents

Summary of Public Meeting with Industry Regarding Methods for Sizing Flaws that May be Found During Inner Diameter In-Service Inspections of Reactor Inlet and Outlet Nozzle to Safe End and Safe End to Pipe Welds (TAC ME2257).

Accession Number: ML12097A071

Date Released: Friday, April 13, 2012

Package Contents

The following links on this page are to Adobe Portable Document Format (PDF) files. To obtain a free viewer for displaying this format, see our Plugins, Viewers, and Other Tools.

• ML12102A315 - 04/11/2012 Meeting Summary with Industry Regarding Methods for Sizing Flaws that May be Found During Inner Diameter In-Service Inspections of Reactor Inlet and Outlet Nozzle to Safe End and Safe End to Pipe Welds. (5 page(s), 4/11/2012)
• ML12066A207 - 03/16/2012 Notice of Forthcoming Meeting with the Performance Demonstration Initiative Regarding Inability to Meet Prescribed Root Mean Square Error for Sizing Flaws from the Inner Diameter or Welds. (5 page(s), 3/6/2012)
• ML12079A388 - 03/16/2012 EPRI Slides - Assessment of Effect of the Depth Sizing. (28 page(s), 3/19/2012)
• ML12079A391 - Public Meeting Introduction Slides, "Depth-Sizing Uncertainties of Inner Diameter Inspections of Supplement 2 and 10 Welds." (5 page(s), 3/19/2012)
• ML12079A389 - 03/16/2012 EPRI Slides - Industry Depth Sizing Capability for Large Bore Piping Welds from Inside Surface. (37 page(s), 3/19/2012)