Home > NRC Library > ADAMS Public Documents
Scientific Investigation Plan for Waste Package Performance Assessment Activities Conceptual Design Cycle WBS 1.2.1.4.2.
Accession Number: ML032170611
Date Released: Thursday, August 14, 2003
Package Contents
The following links on this page are to Adobe Portable Document Format (PDF) files. To obtain a free viewer for displaying this format, see our Plugins, Viewers, and Other Tools.
- ML031680647 - Scientific Investigation Plan for Waste Package Performance Assessment Activities Conceptual Design Cycle WBS 1.2.1.4.2. (33 page(s), 11/22/1989)
- ML031680651 - Activity Plan, Sub-Activity l-20-20a of the "Scientific Investigation Plan for Waste Package Performance Assessment Conceptual Design Cycle." (10 page(s), 11/30/1989)
- ML031680656 - Engineered Barrier System Field Tests-Prototype Tests. (18 page(s), 10/16/1989)
- ML031680662 - Establishment of Selection Criteria Activity E-20-15 Metal Barrier Selection & Testing. (12 page(s), 5/31/1989)
- ML031680664 - Activity Plan Parametric Studies: Use of Linear-Sweep Polarization to Determine Pitting Potentials. (21 page(s), 7/26/1989)
- ML031680668 - Activity Plan Parametric Studies of Metal Degradation and Microstructure: Measurement of Plane-Strain Fracture Toughness. (14 page(s), 7/27/1989)
- ML031680674 - Determination of Plane-Strain Fracture Toughness (K-IC) and the Threshold Stress Intensity for Stress Corrosion Cracking (K-ISCC). (42 page(s), 10/4/1989)
- ML031680677 - Technical Implementing Procedure TIP-CM-2 Operator Calibration of Scanning Transmission Electron Microscopes. (8 page(s), 9/26/1989)
- ML031680682 - Technical Implementing Procedure TIP-CM-3 Operator Calibration of Scanning Electron Microscopes. (5 page(s), 9/26/1989)
- ML031680684 - Technical Implementing Procedure TIP-CM-4 Operator Calibration of The Optical Metallograph. (6 page(s), 9/26/1989)
- ML031680685 - Identification and Control of Metal-Specimens. (8 page(s), 11/22/1989)
- ML031680686 - Determination of Stress Corrosion Cracking Susceptibility Using the Constant Extension Rate Technique. (22 page(s), 1/29/1990)
- ML032170616 - Plan for Spent Fuel Waste From Testing for NNWSI. (30 page(s), 11/30/1987)
- ML031680688 - Low-Temperature Oven Method for Spent Fuel Oxidation Testing - Activity Plan (D-20-45) - for YMP WBS Element 1.2.2.3.1.1 LLNL-YMP Spent Fuel Waste Form Testing. (37 page(s), 8/16/1989)
- ML031680689 - Low-Temperature Oven Method for Spent Fuel Oxidation Testing - Activity Plan (D-20-45) - for YMP WBS Element 1.2.2.3.1.1 LLNL-YMP Spent Fuel Waste Form Testing. (16 page(s), 8/16/1989)
- ML031680694 - Activity Plan Parametric Studies of Metal Degradation and Microstructure: Measurement of Threshold Stress Intensity for Stress Corrosion Cracking. (40 page(s), 8/1/1989)
- ML031680702 - Sample Preparation for Spent Fuel Oxidation Testing Using a Dry Bath Heating System. (11 page(s), 1/31/1980)
- ML031680704 - SFO-1-2, Measurement of Spent Fuel Oxidation Using a Dry Bath Heating System. (10 page(s), 8/16/1988)
- ML031680717 - HTA-3-1, Solids Analysis: Scanning Electron Microscopy. (4 page(s), 7/1/1987)
- ML031680751 - HTA-3-2, Solids Analysis: Transmission/Scanning Transmission Electron Microscopy. (6 page(s), 7/1/1987)
- ML031680772 - HTA-3-3, Solids Analysis: X-Ray Diffraction Analysis. (14 page(s), 7/2/1987)
- ML031680800 - Safety Evaluation for Lawrence Livermore National Laboratory Quality Assurance Program Plan. (6 page(s), 10/20/1989)
- ML031680821 - Quality Procedures Table Contents. (153 page(s), 4/17/1990)