United States Nuclear Regulatory Commission - Protecting People and the Environment

Consolidated Guidance About Materials Licenses: Program-Specific Guidance About Possession Licenses for Production of Radioactive Material Using an Accelerator, Draft Report for Comment (NUREG-1556, Volume 21, Revision 1)

This NUREG-series publication was issued for public comment. The comment period is now closed.

On this page:

Download complete document

Publication Information

Manuscript Completed: November 2016
Date Published: November 2016

Prepared by:
D. Lawyer
R. MacDougall
K. Null
L. Roldan-Otero
K. Von Ahn

Office of Nuclear Material Safety and Safeguards
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001

Availability Notice

Abstract

This technical report contains information intended to provide program-specific guidance and assist applicants and licensees in preparing applications for the production of radioactive material using an accelerator. In particular, it describes the types of information needed to complete U.S. Nuclear Regulatory Commission (NRC) Form 313, "Application for Materials License." This document describes both the methods acceptable to the NRC license reviewers in implementing the regulations and the techniques used by the reviewers in evaluating the application to determine if the proposed activities are acceptable for licensing purposes.

Paperwork Reduction Act Statement

This NUREG contains information collection requirements that are subject to the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.). These information collections were approved by the Office of Management and Budget (OMB), approval numbers 3150-0014; 3150-0011; 3150-0021; 3150-0151; 3150-0155; 3150-0008; 3150-0002; and 3150-0093.

Public Protection Notification

The NRC may not conduct or sponsor, and a person is not required to respond to, a request for information or an information collection requirement unless the requesting document displays a currently valid OMB control number.

Page Last Reviewed/Updated Tuesday, February 28, 2017