| NUREG-0800 SRP/DSRS Section No. |
NUREG-0800 SRP/DSRS Section Title |
Applicability of NUREG-0800 Section to mPower™ Design |
Comments/Additional Guidance Documents to be used for Review, etc. |
5.2.1.1
ML12272A091 |
Compliance With the Codes and Standards Rule, 10 CFR 50.55a |
C) Modify SRP Section for DSRS |
|
5.2.1.2
ML12272A096 |
Applicable Code Cases |
C) Modify SRP Section for DSRS |
|
| 5.2.2 |
Overpressure Protection |
C) Modify SRP Section for DSRS |
This section to be released for public comment via separate FRN at a later date. |
5.2.3
ML12272A007 |
Reactor Coolant Pressure Boundary Materials |
C) Modify SRP Section for DSRS |
|
5.2.4
ML070550066 |
Reactor Coolant Pressure Boundary Inservice Inspection and Testing |
A) Use SRP Section "as-is" (minor comments) |
|
5.2.5
ML12313A468 |
Reactor Coolant Pressure Boundary Leakage Detection |
C) Modify SRP Section for DSRS |
|
5.3.1
ML12272A008 |
Reactor Vessel Materials |
C) Modify SRP Section for DSRS |
|
5.3.2
ML12272A009 |
Pressure-Temperature Limits, Upper-shelf Energy, and Pressurized Thermal Shock |
C) Modify SRP Section for DSRS |
|
5.3.3
ML12272A010 |
Reactor Vessel Integrity |
C) Modify SRP Section for DSRS |
|
| 5.4 |
Reactor Coolant System Components and Subsystem Design |
C) Modify SRP Section for DSRS |
This section to be released for public comment via separate FRN at a later date. |
5.4.1.1
ML063600398 |
Pump Flywheel Integrity (PWR) |
A) Use SRP Section "as-is" (minor comments) |
|
5.4.2.1
ML12272A244 |
Steam Generator Materials |
C) Modify SRP Section for DSRS |
|
5.4.2.2
ML12272A245 |
Steam Generator Program |
C) Modify SRP Section for DSRS |
|
| 5.4.6 |
Reactor Core Isolation Cooling System (BWR) |
B) Delete SRP Section for DSRS (N/A) |
|
5.4.7
ML12319A582 |
Residual Heat Removal (RHR) System |
C) Modify SRP Section for DSRS |
|
| 5.4.8 |
Reactor Water Cleanup System (BWR) |
B) Delete SRP Section for DSRS (N/A) |
|
| 5.4.11 |
Pressurizer Relief Tank |
C) Modify SRP Section for DSRS |
This section to be released for public comment via separate FRN at a later date. |
5.4.12
ML070770005 |
Reactor Coolant System High Point Vents |
A) Use SRP Section "as-is" (minor comments) |
|
| 5.4.13 |
Isolation Condenser System (BWR) |
B) Delete SRP Section for DSRS (N/A) |
|
| 5.4.14 |
mPower Auxiliary Condenser System (CNX) |
D) Develop new DSRS Section |
This section to be released for public comment via separate FRN at a later date. |
BTP 5-1
ML070850019 |
Monitoring of Secondary Side Water Chemistry in PWR Steam Generators |
A) Use SRP Section "as-is" (minor comments) |
|
BTP 5-2
ML070850008 |
Overpressure Protection of Pressurized-Water Reactors While Operating at Low Temperatures |
A) Use SRP Section "as-is" (minor comments) |
|
BTP 5-3
ML070850035 |
Fracture Toughness Requirements |
A) Use SRP Section "as-is" (minor comments) |
|
BTP 5-4
ML12275A020 |
Design Requirements of the Residual Heat Removal System |
C) Modify SRP Section for DSRS |
|