KENO3D Visualization Tool for KENO V.a and KENO-VI Geometry Models (NUREG/CR-6662)

On this page:

• Publication Information
• Abstract

Download complete document

• NUREG/CR-6662 (PDF - 1.51 MB)

Publication Information

Manuscript Completed: March 2000
Date Published: June 2000

Prepared by:
J. E. Horwedel, S. M. Bowman

Oak Ridge National Laboratory
Managed by Lockheed Martin Energy Research Corporation
P.O. Box 2008
Oak Ridge, TN 37831-6370

H. D. Felsher, NRC Project Manager

Prepared for:
Division of Fuel Cycle Safety and Safeguards
Office of Nuclear Material Safety and Safeguards
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001

NRC Job Code B0304

Availability Notice

Abstract

Criticality safety analyses often require detailed modeling of complex geometries. Effective visualization tools can enhance checking the accuracy of these models. This report describes the KENO3D visualization tool developed at the Oak Ridge National Laboratory (ORNL) to provide visualization of KENO V.a and KENO-VI criticality safety models. The development of KENO3D is part of the current efforts to enhance the SCALE (Standardized Computer Analyses for Licensing Evaluations) computer software system.