Proceedings of the Sixth NRC/ASME Symposium onValve and Pump Testing: Held at Hyatt Regency Hotel, Washington, DC, July17–20, 2000 (NUREG/CP-0152, Volume 3)

On this page:

• Publication Information
• Abstract

Download complete document

• NUREG/CP-0152, Volume 3
• Cover through Session 2(b) (PDF - 18.0 MB)
• Session 3(a) through Session 4 (PDF - 14.4 MB)

Publication Information

Manuscript Completed: June 2000
Date Published: July 2000

Proceedings edited by:
T.G. Scarbrough, M. Kotzalas
Division of Engineering
Office of Nuclear Reactor Regulation
U.S. Nuclear Regulatory Commission

Symposium sponsored by:
Office of Nuclear Reactor Regulation
U.S. Nuclear Regulatory Commission
Washington, DC 20555-0001

Board of Nuclear Codes and Standards
American Society of Mechanical Engineers
Three Park Avenue
New York, NY 10016-5990

Availability Notice

Abstract

The 2000 Symposium on Valve and Pump Testing, jointly sponsored by the Board on Nuclear Codes and Standards of the American Society of Mechanical Engineers and by the U.S. Nuclear Regulatory Commission, provides a forum for exchanging information on technical and regulatory issues associated with the testing of valves and pumps used in nuclear power plants. The symposium provides an opportunity to discuss the need to improve that testing in order to help ensure the reliable performance of valves and pumps. The participation of industry representatives, regulatory, and consultants ensures the discussion of a broad spectrum of ideas and perspectives regarding the improvement of testing programs and methods at nuclear power plants.