United States Nuclear Regulatory Commission - Protecting People and the Environment

2014 Inspection Reports

The purpose of inspection reports is to document the inspection scope, observation, and findings of inspections conducted by the NRC. The NRC performs inspections to oversee the commercial nuclear industry to determine whether its requirements are being met by licensees and their contractors. The NRC performs inspections to verify the quality and suitability of vendor products, licensee-vendor interface, and review of equipment problems found during operation and their corrective action.

For inspections and related vendor inspections conducted by Region II for the Mixed Oxide Fuel Fabrication Facility, please reference the Meetings About Mixed Oxide Fuel page.

Prior to December 1999, the NRC issued NUREG-0040, "Licensee Contractor and Vendor Inspection Status Report," (The White Book) to document the results of inspections performed by the NRC's Quality Assurance, Vendor Inspection, Maintenance and Allegations Branch that were distributed to the inspected organizations. As of November 1999, these inspection reports are available electronically in the NRC's record retrieval system, ADAMS. The following inspections have been conducted since May 2005:

This page includes links to files in non-HTML format. See Plugins, Viewers, and Other Tools for more information.

Inspection
Report Date
Description
TBA RSCC Wire & Cable LCC., East Granby, CT, limited scope inspection to assess their compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs as it pertains to the implementation of safety-related activities for U.S. regulated facilities
TBA Carolina Energy Solutions, Rock Hill, South Carolina, limited scope inspection to assess compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs, specifically as it pertains to activities related to the fabrication of piping for the Westinghouse Electric Company AP1000 reactor design
TBA Steris Isomedix Services, Whippany, New Jersey, limited scope inspection to assess Steris Isomedixs' compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs, specifically as it pertains to their irradiation services associated with the qualification of nuclear safety related components
TBA Specialty Maintenance and Construction, Inc., Lakeland, Florida, limited scope inspection to assess their compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs, specifically as it pertains to activities conducted related to the design, manufacture, and qualification testing of components for NRC regulated facilities
TBA C&D Technologies, Blue Bell, PA, limited scope inspection to assess C&D Technologies' compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs, specifically as it pertains to their design process, dedication, and testing of batteries supplied to operating nuclear power plants.
04/11/14 United Controls International, Norcross, Georgia, limited scope inspection to assess United Controls International's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs as it pertains to the implementation of safety-related activities for U.S. regulated facilities.
04/02/14 Wyle Laboratories, Huntsville, AL, limited scope inspection to assess Wyle Laboratories' compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs, specifically to observe testing associated with submergence testing of the squib valve actuators being supplied as part of the Westinghouse AP1000 design
03/31/14 Pentair Valves and Controls, Mansfield, MA, follow-up inspection to observe the re-testing of the pressurizer safety valve (PV-62), for the Westinghouse Electric Company (WEC) AP1000 reactor design
03/25/14 Westinghouse Electric Company (WEC), Cranberry Township, PA, limited scope inspection at your Warrenton facility to assess WEC's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs as they pertain to safety-related activities for US regulated facilities. Specifically, the QA program will be reviewed as it pertains to WEC'S implementation of quality activities associated with the development of the AP1000 protection and safety monitoring system and subsystems.
03/21/14 Chicago Bridge & Iron (CB&I), Lake Charles, LA, limited scope inspection to assess CB&I's compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs specifically related to safety-related activities for US regulated facilities.
03/07/14 Enersys, Reading, PA, limited scope inspection at your Hays, Kansas facility to assess Enersys' compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs as they pertain to safety-related activities for US regulated facilities. Specifically, the QA program will be reviewed as it pertains to EnerSys' design process, manufacturing, and testing for batteries supplied to operating nuclear power plants and the design, qualification, and testing program for batteries being qualified for the AP1000 new reactor design.
01/29/14 Rosemount Nuclear Instruments, Inc. (Rosemount), Chanhassen, Minnesota, limited scope inspection to assess Rosemounts' compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 programs as they pertain to safety-related activities for US regulated facilities.
01/22/14 Wyle Laboratories, Huntsville, Alabama, limited scope inspection to assess Wyle Laboratories' compliance with selected portions of their quality assurance (QA) and 10 CFR Part 21 as it pertains to functional and qualification testing of the squib valves for the Westinghouse AP1000 design. The inspectors will also review implementation of your corrective actions to issues identified in Inspection Report 99900905/2012-201
Page Last Reviewed/Updated Tuesday, April 22, 2014