United States Nuclear Regulatory Commission - Protecting People and the Environment

2007 Inspection Reports

The purpose of inspection reports is to document the inspection scope, observation, and findings of inspections conducted by the NRC. The NRC performs inspections to oversee the commercial nuclear industry to determine whether its requirements are being met by licensees and their contractors. The NRC performs inspections to verify the quality and suitability of vendor products, licensee-vendor interface, and review of equipment problems found during operation and their corrective action.

For inspections and related vendor inspections conducted by Region II for the Mixed Oxide Fuel Fabrication Facility, please reference the Meetings About Mixed Oxide Fuel page.

Prior to December 1999, the NRC issued NUREG-0040, "Licensee Contractor and Vendor Inspection Status Report," (The White Book) to document the results of inspections performed by the NRC's Quality Assurance, Vendor Inspection, Maintenance and Allegations Branch that were distributed to the inspected organizations. As of November 1999, these inspection reports are available electronically in the NRC's record retrieval system, ADAMS. The following inspections have been conducted since May 2005:

This page includes links to files in non-HTML format. See Plugins, Viewers, and Other Tools for more information.

Date Description
12/28/07 Areva NP, Inc., Cranberry Township, PA, inspection of selected portions of Areva NP's quality assurance (QA) program, and 10 CFR Part 21 program implemented at Eaton Cutler-Hammer's facility in Greenwood, South Carolina
12/18/07 Flowserve, Pump Division, Vernon, CA, inspection of Flowserve's 10 CFR Part 21 program
12/18/07 Velan Inc., Montreal, Canada, inspection of selected portions of Velan's quality assurance (QA) program, and 10 CFR Part 21 program
12/11/07 Geotechnical Engineering Center's Soil Dynamics Laboratory, University of Texas at Austin (UTX), Austin, TX, inspection of selected portions of Soil Dynamics Laboratory's quality assurance (QA) program, and 10 CFR Part 21 program
11/07/07 Areva NP Inc., Lynchburg, VA, inspection of selected portions of Areva NP Inc.'s quality assurance (QA) program, and 10 CFR Part 21 program
  • No Vendor Response Required
10/16/07 Conval Inc., Somers, CT, inspection of selected portions of Conval's quality assurance (QA) program, and 10 CFR Part 21 program
10/09/07 Babcock & Wilcox Canada, Cambridge Ontario, Canada, inspection of selected portions of Babcock & Wilcox Canada's quality assurance (QA) program, and 10 CFR Part 21 program
09/28/07 Westinghouse Nuclear Fuel, Westinghouse Electric Company, LLC, Columbia, SC, inspection of selected portions of Westinghouse Nuclear Fuel's quality assurance (QA) program, and 10 CFR Part 21 program
09/28/07 Cameron Measurement Systems, Division of Cameron, City of Industry, CA, inspection of Cameron Measurement Systems' 10 CFR Part 21 program
08/31/07 Target Rock, Inc., Division of Curtiss-Wright Flow Control Corporation, East Farmingdale, NY, inspection of selected portions of Target Rock's quality assurance (QA) program, and 10 CFR Part 21 program.
  • No Vendor Response Required
08/09/07 Veridiam Inc., El Cajon, CA, inspection of selected portions of Veridiam's quality assurance (QA) program, and 10 CFR Part 21 program.
  • No Vendor Response Required
05/24/07 The Japan Steel Works (JSW), Muroran, Japan, audit of selected portions of JSW's quality assurance (QA) program, and 10 CFR Part 21 program.
01/09/07 Engine Systems, Inc. (ESI), Rocky Mount, NC, inspection of selected portions of ESI's quality assurance (QA) program, and 10 CFR Part 21 program.
Page Last Reviewed/Updated Friday, April 19, 2013